Kênh thông tin cho thuê căn hộ số 1 Việt Nam
Đăng tin
Gò Vấp, Hồ Chí Minh
Dự án
Chọn giá
70 - 100m2
Số phòng ngủ
Số toilet
Hướng chính
Đặt lại

Cho thuê căn hộ chung cư Osimi Tower Diện tích từ 70m2 đến 100m2 T4/2025

Hiện có 5 căn hộ cho thuê

Đề xuất Mới đăng Có video

CHO THUÊ CĂN HỘ CHUNG CƯ OSIMI TOWER T4/2025

Osimi Tower dự án được phát triển bởi chủ đầu tư Cty cổ phần ANI (Sông Đà IDC), đã bàn giao vào năm 2019 cho đến nay đã thu hút được sự quan tâm của chủ đầu tư cho thuê chung cư Osimi Tower. Vậy khi bạn muốn thuê căn hộ này cần phải nắm những thông tin gì? thuê căn hộ chung cư Osimi Tower có rẻ không? Cùng xem ngay bài viết dưới đây nhé.

Căn hộ chung cư Osimi Tower cho thuê
Căn hộ chung cư Osimi Tower cho thuê

Bảng giá cho thuê căn hộ chung cư Osimi Tower

Chung cư Osimi Tower xây dựng với quy mô lớn gồm 3 tòa block cao 18 tầng mà mỗi tầng chỉ 10 căn hộ. Nằm hiện hữu ngay tuyến đường Lê Đức Thọ một khu vực sầm uất kết nối đến mọi nơi, còn sở hữu nhiều tiện ích đẳng cấp. Nhưng vậy liệu giá cho thuê căn hộ chung cư Osimi Tower có thật sự rẻ không, cùng xem ngay bảng giá dưới đây nhé.

BẢNG GIÁ CHO THUÊ CĂN HỘ CHUNG CƯ OSIMI TOWER T4/2025
1 phòng ngủ (53m2) 2 phòng ngủ (53 - 75m2) 3 phòng ngủ (68 - 98m2)
6 - 6.5 triệu/tháng 8 - 11.5 triệu/tháng 10 - 12 triệu/tháng

Về mặt giá cho thuê căn hộ Osimi Tower cung cấp mức giá phải chăng phù hợp với nhiều đối tượng khách hàng. Đối với căn hộ 1 phòng ngủ, giá thuê là 6 triệu đến 6.5 triệu/tháng. Đối với căn hộ 2 phòng ngủ, mức giá nằm trong khoảng 8 triệu đến 11.5 triệu/tháng. Đối với căn hộ 3 phòng ngủ, giá thuê cao hơn dao động từ 10 triệu đến 12 triệu/tháng. Điều này cho thấy sự linh hoạt đối với người thuê, vì họ có thể chọn lựa dựa trên nhu cầu cụ thể và ngân sách cá nhân.

Những thông tin cần biết khi chọn thuê căn hộ chung cư Osimi Tower

1. Nằm cạnh nhiều tuyến đường huyết mạch

Dự án Osimi Tower tọa lạc tại con đường Lê Đức Thọ, Phường 15, Gò Vấp. Và còn nằm cạnh nhiều tuyến đường lớn khác như Quốc Lộ 1A, Phạm Văn Đồng, Lê Đức Thọ, Nguyễn Oanh, Nguyễn Văn Lượng, Phan Văn Trị,... thông qua những con đường này bạn có thể di chuyển nhanh chóng đến các khu vực quận lân cận như Bình Thạnh, Tân Bình, Thủ Đức, Bình Dương, ..... Đây còn được xem là một trong những vị trí liên kết vùng thuận lợi nhất Sài Gòn, kết nối giao thông hoàn hảo đi đâu cũng thuận tiện.

Chung cư Osimi Tower nằm cạnh nhiều tuyến đường huyết mạch
Chung cư Osimi Tower nằm cạnh nhiều tuyến đường huyết mạch

Không những thế cơ sở hạ tầng nơi đây ngày càng được nâng cấp, khu vực đông dân cư nằm gần với sân bay TSN nên sẽ có nhiều cơ hội phát triển về mặt kinh tế. Ngoài ra, khi chọn thuê chung cư Osimi Tower nói riêng và thuê chung cư Gò Vấp nói chung cư dân còn được thừa hưởng nhiều tiện ích xung quanh như chỉ cần di chuyển vài phút là tiếp cận đến những tiện ích TTTM Lotte Mart, BV Gò Vấp, Emart, siêu thị CoopMart, trường tiểu học Võ Thị Sáu, ĐHCN TPHCM, công viên văn hóa Gò Vấp, Vincom Plaza, ....

2. Không gian sống tiện lợi và hòa mình vào thiên nhiên

Mật độ xây dựng của Osimi Tower thấp chỉ 38.69% còn lại dành để xây một dựng không gian sống xanh nằm dọc trong khuôn viên căn hộ, mang lại cho cư dân một không khí trong lành, hòa mình vào thiên nhiên vừa thanh bình vừa êm dịu tạo cảm giác dễ chịu sau những giờ làm việc.

Chung cư Osimi Tower không gian sống tiện lợi và hòa mình vào thiên nhiên
Chung cư Osimi Tower không gian sống tiện lợi và hòa mình vào thiên nhiên

Không những thế, dự án còn được chủ đầu tư xây dựng thêm trường tiểu học nằm dưới dự án, nhiều cư dân sinh sống tại đây đã cho con theo học vừa tiết kiệm được thời gian di chuyển mà còn an tâm hơn. Bên cạnh đó sự tiện lợi của dự án còn được thể hiện ở việc nhiều tiện ích nội khu đa dạng như TTTM, khu vui chơi, khu mua sắm, nhà hàng, thư viện, hồ bơi, quán cafe, phòng gym, spa, .... đem lại cuộc sống đầy đủ cho cư dân đáp ứng nhu cầu sinh hoạt mà không cần phải đi đâu xa, chỉ cách vài bước chân đến được các tiện ích đó.

3. Thiết kế căn hộ chăm chút đến từng chi tiết

Trong mỗi căn hộ chủ đầu tư đều chăm chút đến từng chi tiết với nội thất cao cấp, đảm bảo mang đến một căn hộ chất lượng sử dụng được lâu dài, có ban công rộng view cảnh quan thoáng mát đón nắng, gió và ánh sáng tự nhiên vào từng ngóc ngách trong căn hộ giúp tiết kiệm thêm chi phí điện.

Thiết kế căn hộ Osimi Tower chăm chút đến từng chi tiết
Thiết kế căn hộ Osimi Tower chăm chút đến từng chi tiết

Căn hộ được thiết kế bởi công ty nội thất AEROS một đơn vị đã có nhiều năm kinh nghiệm trong nghề, đảm bảo tính thẩm mỹ trong cách thiết kế, sử dụng nội thất thông minh vừa gọn gàng mà vừa tối đa được diện tích có không gian rộng cho sinh hoạt gia đình.

Tìm thuê căn hộ chung cư Osimi Tower tại thuecanho123.com

Trang web thuecanho123.com đã trở thành địa chỉ tuyệt vời cho những người đang tìm kiếm thuê căn hộ TPHCM nói chung và căn hộ chung cư Osimi Tower cho thuê nói riêng. Được biết đến với sự đa dạng trong lựa chọn, từ căn hộ 1 phòng ngủ cho đến những căn hộ 3 phòng ngủ, trang web này cung cấp cho người thuê nhiều sự lựa chọn phong phú để đáp ứng nhu cầu cụ thể của họ.

Tìm thuê căn hộ chung cư Osimi Tower tại thuecanho123.com
Tìm thuê căn hộ chung cư Osimi Tower tại thuecanho123.com

Thuecanho123 là một website đáng để bạn quan tâm và lựa chọn khi có nhu cầu tìm thuê căn hộ, với sự tận tâm, luôn mang đến cho người thuê những căn hộ chất lượng, phù hợp và an ninh nhất. Thuecanho123.com xứng đáng là một địa chỉ đáng tin cậy mà bạn không nên bỏ qua.

Chọn khu vực
  • Toàn quốc
  • Hồ Chí Minh
  • Hà Nội
  • Bình Dương
  • Đà Nẵng
  • Hải Phòng
  • Long An
  • Bà Rịa Vũng Tàu
  • An Giang
  • Bắc Giang
  • Bắc Kạn
  • Bạc Liêu
  • Bắc Ninh
  • Bến Tre
  • Bình Định
  • Bình Phước
  • Bình Thuận
  • Cà Mau
  • Cần Thơ
  • Cao Bằng
  • Đắk Lắk
  • Đắk Nông
  • Điện Biên
  • Đồng Nai
  • Đồng Tháp
  • Gia Lai
  • Hà Giang
  • Hà Nam
  • Hà Tĩnh
  • Hải Dương
  • Hậu Giang
  • Hòa Bình
  • Hưng Yên
  • Khánh Hòa
  • Kiên Giang
  • Kon Tum
  • Lai Châu
  • Lâm Đồng
  • Lạng Sơn
  • Lào Cai
  • Nam Định
  • Nghệ An
  • Ninh Bình
  • Ninh Thuận
  • Phú Thọ
  • Phú Yên
  • Quảng Bình
  • Quảng Nam
  • Quảng Ngãi
  • Quảng Ninh
  • Quảng Trị
  • Sóc Trăng
  • Sơn La
  • Tây Ninh
  • Thái Bình
  • Thái Nguyên
  • Thanh Hóa
  • Thừa Thiên Huế
  • Tiền Giang
  • Trà Vinh
  • Tuyên Quang
  • Vĩnh Long
  • Vĩnh Phúc
  • Yên Bái
Hồ Chí Minh
  • Tất cả
  • Quận 1
  • Quận 2
  • Quận 3
  • Quận 4
  • Quận 5
  • Quận 6
  • Quận 7
  • Quận 8
  • Quận 9
  • Quận 10
  • Quận 11
  • Quận 12
  • Bình Tân
  • Bình Thạnh
  • Gò Vấp
  • Phú Nhuận
  • Tân Bình
  • Tân Phú
  • Thủ Đức
  • Bình Chánh
  • Cần Giờ
  • Củ Chi
  • Hóc Môn
  • Nhà Bè
Gò Vấp
  • Tất cả
  • Phường 1
  • Phường 3
  • Phường 4
  • Phường 5
  • Phường 6
  • Phường 7
  • Phường 8
  • Phường 9
  • Phường 10
  • Phường 11
  • Phường 12
  • Phường 13
  • Phường 14
  • Phường 15
  • Phường 16
  • Phường 17
Chọn khoảng giá
  • Tất cả
  • Dưới 5 triệu
  • 5 - 7 triệu
  • 7 - 10 triệu
  • 10 - 15 triệu
  • 15 - 20 triệu
  • 20 - 30 triệu
  • 30 - 50 triệu
  • 50 - 100 triệu
  • Trên 100 triệu
Hủy
Áp dụng
Chọn diện tích
  • Tất cả
  • Dưới 20m2
  • 20m2 - 30m2
  • 30m2 - 50m2
  • 50m2 - 70m2
  • 70m2 - 90m2
  • 90m2 - 120m2
  • 120m2 - 200m2
  • 200m2 - 500m2
  • Trên 500m2
Hủy
Áp dụng
Số phòng ngủ
  • Tất cả
  • 1 phòng ngủ
  • 2 phòng ngủ
  • 3 phòng ngủ
  • 4+ phòng ngủ
Hủy
Áp dụng
Số toilet
  • Tất cả
  • 1 toilet
  • 2 toilet
  • 3 toilet
  • 4+ toilet
Hủy
Áp dụng
Hướng chính
  • Tất cả
  • Đông
  • Tây
  • Nam
  • Bắc
  • Đông Nam
  • Đông Bắc
  • Tây Nam
  • Tây Bắc
Hủy
Áp dụng
Hỗ trợ chủ nhà
Ms.Huỳnh Hương
0903.007.123
Hỗ trợ ngoài giờ
Thuecanho123
Bảng giá dịch vụ Hướng dẫn đăng tin Yêu cầu hỗ trợ
Queries155Models462
Request history7MBMemory Usage
155 statements were executed, 110 of which were duplicates, 45 unique. Show only duplicated126ms
  • Connection Establishedtch123_dev_2020Khelper.php#2679
    Backtrace
    • 15. app/Helpers/Khelper.php:2679
    • 16. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 17. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 18. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • select * from `tch_redirects` where `status` = 1 and `url` = '/cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap.html' limit 14.16mstch123_dev_2020Khelper.php#2679
    Bindings
    • 0: 1
    • 1: /cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap.html
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/Khelper.php:2679
    • 17. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 18. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 19. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 20. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • - EXPLAIN # 1: `tch_redirects` (SIMPLE)18161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_redirects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1816
    • Extra: Using where
  • select * from `tch_pages` where `tch_pages`.`id` = 1 limit 1560μstch123_dev_2020PageHelper.php#58
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/PageHelper.php:58
    • 21. app/Helpers/Khelper.php:256
    • 22. middleware::page.hook:14
    • 23. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 24. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap' limit 11.03mstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. middleware::page.hook:16
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 20. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)480μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)450μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2563) and `tch_projects`.`deleted_at` is null700μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)430μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap' limit 1570μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. app/Http/Controllers/PageController.php:37
    • 19. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 20. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)380μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)330μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2563) and `tch_projects`.`deleted_at` is null500μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)440μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, `name`, `code`, `total_posts` from `tch_provinces` order by `ordering` asc, `slug` asc430μstch123_dev_2020LocationHelper.php#24
    Hints
    • 0: The SELECT statement has no WHERE clause and could examine many more rows than intended
    Backtrace
    • 15. app/Helpers/LocationHelper.php:24
    • 16. app/Helpers/Khelper.php:1972
    • 17. app/Services/Page/PageService.php:377
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)631
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 63
    • Extra: Using filesort
  • select * from `tch_global_option` where `name` = 'post_paging' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: post_paging
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Services/Page/PageService.php:362
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select count(*) as aggregate from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `tch_post_apartment_details`.`dien_tich` between 70 and 100 and `project_id` = 2563 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null1.28mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 70
    • 1: 100
    • 2: 2563
    • 3: approved
    • 4: 1
    • 5: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)191
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: PRIMARY,out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_status_out_of_service_ordering_deleted_at
    • key_len: 312
    • ref: const,const,const,const
    • rows: 19
    • Extra: Using where; Using index
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using index condition; Using where
  • select `tch_posts`.* from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `tch_post_apartment_details`.`dien_tich` between 70 and 100 and `project_id` = 2563 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null order by `tch_posts`.`ordering` desc, `tch_posts`.`published_at` desc limit 20 offset 01.75mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 70
    • 1: 100
    • 2: 2563
    • 3: approved
    • 4: 1
    • 5: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)191
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: PRIMARY,out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_deleted_at
    • key_len: 13
    • ref: const,const,const
    • rows: 19
    • Extra: Using index condition; Using where; Using filesort
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using index condition; Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31)450μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (118650, 180122226, 180130478, 180132000, 180136478)680μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using index condition
  • select * from `tch_post_apartment_expands` where `tch_post_apartment_expands`.`post_id` in (118650, 180122226, 180130478, 180132000, 180136478)1.1mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_expands` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_expands
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using index condition
  • select * from `tch_projects` where `tch_projects`.`id` in (2563) and `tch_projects`.`deleted_at` is null440μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` > 0 and `project_id` > 0 and `tch_pages`.`project_id` in (2563)38.27mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 2563
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)360μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` = 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`province_id` in (1)500μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 0
    • 4: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (6)430μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`district_id` in (6)490μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_users` where `tch_users`.`id` in (1004, 1024, 1105, 1137) and `tch_users`.`deleted_at` is null850μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_users` (SIMPLE)41
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_users
    • type: range
    • possible_keys: PRIMARY,deleted_at
    • key: deleted_at
    • key_len: 9
    • ref: 
    • rows: 4
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1390μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/Khelper.php:195
    • 19. app/Services/Page/PageService.php:427
    • 20. app/Services/Page/PageService.php:32
    • 21. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (1) order by `ordering` asc, `id_province` asc, `name` asc480μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/Khelper.php:195
    • 24. app/Services/Page/PageService.php:427
    • 25. app/Services/Page/PageService.php:32
    • 26. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 1 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc510μstch123_dev_2020Province.php#28
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Services/Page/PageService.php:427
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id` = 6 limit 1500μstch123_dev_2020LocationHelper.php#322
    Bindings
    • 0: 6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:322
    • 21. app/Helpers/Khelper.php:207
    • 22. app/Services/Page/PageService.php:430
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, CONCAT(pre," ",name) as text, CONCAT(pre," ",name) as name from `tch_wards` where `tch_wards`.`id_district` = 6 and `tch_wards`.`id_district` is not null order by LENGTH(name) ASC, CAST(name AS UNSIGNED) , `name` asc780μstch123_dev_2020District.php#34
    Bindings
    • 0: 6
    Backtrace
    • 16. app/Models/District.php:34
    • 17. app/Services/Page/PageService.php:430
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: ref
    • possible_keys: id_district
    • key: id_district
    • key_len: 4
    • ref: const
    • rows: 16
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = 5 limit 1460μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:183
    • 18. app/Helpers/Khelper.php:2292
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (0)350μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_districts` where `tch_districts`.`id` in (0)350μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null380μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)360μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1' limit 1440μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:189
    • 18. app/Helpers/Khelper.php:2306
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)350μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null330μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1_6' limit 1870μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:216
    • 18. app/Helpers/Khelper.php:2307
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)380μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)300μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null370μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)290μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2346
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1_6_project_2563' limit 1540μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_6_project_2563
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:303
    • 18. app/Helpers/Khelper.php:2350
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2563) and `tch_projects`.`deleted_at` is null380μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)360μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1380μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2355
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1' limit 1490μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.khuvuc:4
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)290μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null380μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc1.66mstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.khuvuc:5
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)430μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)360μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)340μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1330μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1360μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1370μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1390μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1330μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1370μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1360μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1330μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1440μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1310μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1270μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1280μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1280μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1320μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1260μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1350μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1260μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1300μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1240μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1380μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`parent_id` = 2563 and `tch_projects`.`parent_id` is not null and `tch_projects`.`deleted_at` is null5.98mstch123_dev_2020page_part_project_childs.blade.php#13
    Bindings
    • 0: 2563
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.page.page_part.page_part_project_childs:13
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)15401
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1540
    • Extra: Using where
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1290μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1210μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select project_id, COUNT(*) as total from `tch_posts` where `district_id` = 6 and `created_at` > '2025-02-07 00:00:00' and `project_id` > 0 and `tch_posts`.`deleted_at` is null group by `project_id` having COUNT(*) > 0 order by COUNT(*) DESC limit 20710μstch123_dev_2020ProjectHelper.php#255
    Bindings
    • 0: 6
    • 1: 2025-02-07 00:00:00
    • 2: 0
    • 3: 0
    Backtrace
    • 15. app/Helpers/ProjectHelper.php:255
    • 16. view::_desktop.main.page.page_part.page_part_project:8
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: range
    • possible_keys: project_id_published_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at,district_id_published_status_out_of_service_deleted_at,created_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 1
    • Extra: Using index condition; Using where; Using temporary; Using filesort
  • select * from `tch_pages` where `project_id` > '0' and `province_id` = 1 and `count` > 0 and `district_id` = 6 order by `count` desc, `created_at` desc limit 154.99mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 1
    • 2: 0
    • 3: 6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:19
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)18271
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: count_deleted_at
    • key: count_deleted_at
    • key_len: 4
    • ref: 
    • rows: 1827
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)270μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)280μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)250μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (154, 155, 158, 159, 162, 169, 171, 172, 175, 176, 178, 2563, 2665, 3052, 3157) and `tch_projects`.`deleted_at` is null940μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)151
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 15
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)270μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `project_id` > '0' and `district_id` = 6 and 1 = 1 order by `created_at` desc limit 58.14mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:20
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (6)280μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)310μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (173, 2664, 2665, 3052, 3157) and `tch_projects`.`deleted_at` is null550μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)460μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `tch_posts`.* from `tch_posts` where not exists (select * from `tch_promote_post_histories` where `tch_posts`.`id` = `tch_promote_post_histories`.`post_id` and `type` = 'RECREATEPOST' and `tch_promote_post_histories`.`deleted_at` is null) and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`status` = 'approved' and `tch_posts`.`deleted_at` is null order by `tch_posts`.`created_at` desc limit 10790μstch123_dev_2020PostHelper.php#621
    Bindings
    • 0: RECREATEPOST
    • 1: 1
    • 2: 0
    • 3: approved
    Backtrace
    • 15. app/Helpers/PostHelper.php:621
    • 16. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (PRIMARY)201
    Params
    • id: 1
    • select_type: PRIMARY
    • table: tch_posts
    • type: index
    • possible_keys: out_of_service_deleted_at,status_published_out_of_service_ordering_deleted_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 20
    • Extra: Using where
  • - EXPLAIN # 2: `tch_promote_post_histories` (MATERIALIZED)3435592
    Params
    • id: 2
    • select_type: MATERIALIZED
    • table: tch_promote_post_histories
    • type: ALL
    • possible_keys: post_id,type,deleted_at
    • key: 
    • key_len: 
    • ref: 
    • rows: 343559
    • Extra: Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 33, 34, 37)440μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: ALL
    • possible_keys: PRIMARY
    • key: 
    • key_len: 
    • ref: 
    • rows: 7
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1, 2)390μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (9, 11, 14, 21, 27)380μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180223418, 180223419, 180223420, 180223421, 180223423, 180223424, 180223425, 180223429, 180223432, 180223433)390μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)101
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 10
    • Extra: Using index condition
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1330μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1320μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1330μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1290μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1420μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1400μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1400μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_articles` where `published` = 1 and `tch_articles`.`deleted_at` is null order by `created_at` desc limit 5580μstch123_dev_2020ArticleHelper.php#173
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/ArticleHelper.php:173
    • 16. app/Helpers/Khelper.php:2973
    • 17. view::_desktop.main.page.page_part.page_part_lastest_articles:22
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_articles` (SIMPLE)6641
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_articles
    • type: ref
    • possible_keys: published_deleted_at,deleted_at
    • key: deleted_at
    • key_len: 5
    • ref: const
    • rows: 664
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = '5_1' limit 1430μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:3
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)300μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)430μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc1.07mstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:4
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)270μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)300μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)260μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1350μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:6
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)340μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null390μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)330μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc970μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:7
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)370μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)380μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)350μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_3' limit 1440μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_3
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:9
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)320μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null340μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)300μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 3 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc740μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 3
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:10
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)2221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 222
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)310μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (56, 58, 60, 61, 62)370μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)290μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_promotions` where `published` = 1 and date(`date_begin`) <= '2025-04-08' and date(`date_end`) >= '2025-04-08' order by `priority` desc limit 1480μstch123_dev_2020header_user_not_login.blade.php#3
    Bindings
    • 0: 1
    • 1: 2025-04-08
    • 2: 2025-04-08
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.includes.header_user_not_login:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_promotions` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_promotions
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1370μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:3
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (2) order by `ordering` asc, `id_province` asc, `name` asc420μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:3
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 2 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc370μstch123_dev_2020Province.php#28
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:3
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1350μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:17
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` = 6 limit 1260μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 6
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:18
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 83 limit 1430μstch123_dev_2020LocationHelper.php#284
    Bindings
    • 0: 83
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:284
    • 21. app/Helpers/Khelper.php:199
    • 22. app/Http/Resources/ProjectResource.php:19
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_streets` where `tch_streets`.`id` = 827 limit 1420μstch123_dev_2020LocationHelper.php#303
    Bindings
    • 0: 827
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:303
    • 21. app/Helpers/Khelper.php:203
    • 22. app/Http/Resources/ProjectResource.php:20
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_streets` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_streets
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'address' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: address
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. view::_desktop.main.includes.footer:50
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
App\Models\District
187District.php#?
App\Models\Page
99Page.php#?
App\Models\Province
84Province.php#?
App\Models\Project
24Project.php#?
App\Models\Ward
17Ward.php#?
App\Models\Estate
16Estate.php#?
App\Models\PostCanHoDetail
15PostCanHoDetail.php#?
App\Models\Package
5Package.php#?
App\Models\PostCanHoExpand
5PostCanHoExpand.php#?
App\Models\Article
5Article.php#?
App\Models\User
4User.php#?
App\Models\Street
1Street.php#?
ClearShow all
Date ↕MethodURLData
#12025-04-08 13:36:36GET/cho-thue-can-ho-chung-cu-osimi-tower-quan-go-vap.html?dien_tich_den=100&dien_tich_tu=70155462