Sơn Trà, Đà Nẵng
Alphanam Luxury Apartment
Chọn giá
Diện tích
Số phòng ngủ
Số toilet
Hướng chính
Đặt lại

Cho Thuê Căn Hộ Chung Cư Alphanam Luxury Apartment Mới Nhất T4/2025

Hiện có 8 căn hộ cho thuê

CHO THUÊ CĂN HỘ CHUNG CƯ ALPHANAM LUXURY APARTMENT

Dự án căn hộ Alphanam Luxury Apartment được xây dựng bởi Tập đoàn Alphanam, một trong những căn hộ được sở hữu ngay vị trí đắc địa với view nhìn toàn thành phố và view biển. Mang đến cho cư dân một nơi an cư cũng như là một nơi nghỉ dưỡng tuyệt vời, bên cạnh đó khi đầu tư vào căn hộ sẽ nhanh chóng kiếm được lợi nhuận. Vậy đâu là điểm nổi bật thu hút nhiều người cùng nhà đầu tư khi cho thuê căn hộ Alphanam Luxury Apartment, Hãy cùng tham khảo qua bài viết sau đây.

Cho thuê chung cư Alphanam Luxury Apartment
Cho thuê chung cư Alphanam Luxury Apartment

Bảng giá cho thuê căn hộ Alphanam Luxury Apartment

Đây là dự án căn hộ 5* cao cấp với giá cho thuê căn hộ Alphanam Luxury Apartment tương đối cao nhưng có đầy đủ nội thất cao cấp và nhiều tiện nghi xung quanh căn hộ. Dưới đây thuecanho123.com đã cập nhật cho bạn mức giá thuê chung cư Alphanam Luxury Apartment cùng tham khảo nhé!

BẢNG GIÁ CHO THUÊ CĂN HỘ CHUNG CƯ ALPHANAM LUXURY APARTMENT TCH_TIME
1 phòng ngủ (59 - 67m2) 2 phòng ngủ (75 - 100m2) 3 phòng ngủ
12 - 20 triệu/tháng 18 - 25 triệu/tháng Không có

Căn hộ Alphanam Luxury Apartment được tung ra thị trường với đa dạng diện tích 59 - 100m2 từ căn 1 - 2 phòng ngủ từ 12 - 25 triệu/tháng, với mức giá như vậy sẽ phù hợp với mọi cư dân khi lựa chọn thuê căn hộ này. Nằm ngay vị trí đắc địa tại Đà Nẵng với nhiều tiện nghi xung quanh nhằm phục vụ mọi nhu cầu sống cho cư dân. Dự án căn hộ khách sạn 5* này thực sự là nơi an cư lạc nghiệp lý tưởng của cư dân.

Căn hộ Alphanam Luxury Apartment cho thuê
Căn hộ Alphanam Luxury Apartment cho thuê giá rẻ

Điểm nổi bật căn hộ Alphanam Luxury Apartment thu hút người thuê

1. Vị trí địa lý căn hộ Alphanam Luxury Apartment

Căn hộ chung cư Alphanam Luxury Apartment ngay trên con đường Võ Nguyên Giáp gần ngay bờ biển Mỹ Khê được cho là một trong những bãi biển đẹp nhất. Tại đây còn được nhiều người đánh giá là nơi an cư lạc nghiệp cũng như là thiên đường nghỉ dưỡng và thu hút được nhiều khách du lịch đến đây để tham quan. Chung cư Alphanam Luxury Apartment với 4 mặt tiếp giáp với các con đường vô cùng thuận lợi để di chuyển như:

 Vị trí địa lý căn hộ Alphanam Luxury Apartment
Vị trí địa lý căn hộ Alphanam Luxury Apartment

- Phía Đông giáp với đường Võ Nguyên Giáp và bãi tắm Phạm Văn Đồng.

- Phía Tây giáp với đường Đỗ Thế Chấp, từ căn hộ có thể ngắm view thành phố hay cầu sông Hàn.

- Phía Nam giáp với đường Trần Hữu Tước và view biển.

- Phía Bắc giáp với khu đất, khi sống tại căn hộ bạn có thể ngắm view bắc bán đảo Sơn Trà và chùa Linh Ứng.

2. Tiện ích căn hộ Alphanam Luxury Apartment

Căn hộ Alphanam Luxury Apartment tiêu chuẩn 5* nên mọi tiện ích dịch vụ cũng đạt chuẩn 5*, hứa hẹn sẽ mang đến cho cư dân một cuộc sống tiện nghi sẽ chinh phục được những khách hàng khó tính. Với các tiện ích nội khu như:

- Hồ bơi trên không giúp bạn thư giãn sau ngày làm việc mệt mỏi.

- Phòng gym trang bị đầy đủ thiết bị giúp bạn nâng cao sức khỏe.

- Nhà hàng với nhiều món ăn từ các vùng miền giúp bạn có thể sung họp gia đình thưởng thức những món ngon vào ngày cuối tuần.

- Trung tâm hội nghị nơi tổ chức các buổi hội nghị quốc tế và cuộc hội thảo lớn.

Và nhiều tiện ích khác.

Tiện ích căn hộ Alphanam Luxury Apartment
Tiện ích căn hộ Alphanam Luxury Apartment

Dự án cho thuê chung cư Alphanam Luxury Apartment được triển khai trên mảnh đất có vị trí vô cùng thuận lợi với nhiều tiện ích ngoại khu như:

- Khoảng 5km đến sân bay quốc tế thành phố Đà Nẵng.

- Khoảng 3km đến TTTP Đà Nẵng, cầu Rồng, sông Hàn, Bán đảo Sơn Trà....

- Khoảng 4km đến chùa Linh Ứng, Ga Đà Nẵng.

- Khoảng 20km đến điểm du lịch Bà Nà Hills.

- Khoảng 22km đến phố cổ Hội An.

3. Mặt bằng và thiết kế căn hộ Alphanam Luxury Apartment

Chung cư Alphanam Luxury Apartment được cho ra mắt thị trường với 232 căn hộ cùng 390 phòng khách sạn, mỗi căn đều có tầm nhìn mở một mặt ngắm biển một mặt ngắm toàn thành phố sôi động.

Mặt bằng và thiết kế căn hộ Alphanam Luxury Apartment
Mặt bằng và thiết kế căn hộ Alphanam Luxury Apartment

Dưới bàn tay thiết kế của kiến trúc sư với 10 năm trong nghề đã mang đến một công trình thiết kế đẹp mắt, sang trọng và tối ưu được diện tích đón ánh sáng và gió tự nhiên vào trong căn hộ. Với đa dạng diện tích mỗi căn hộ được bố trí từ 1 - 2 phòng ngủ với giá cả vô cùng hợp lý, rất thích hợp cho khách hàng thuê để ở hoặc đầu tư kiếm lời. Và căn hộ Alphanam Luxury Apartment được cho là một trong những nơi đáng sống cũng như khu nghỉ dưỡng tuyệt vời tại Thành Phố Đà Nẵng.

Nơi tìm thuê căn hộ Alphanam Luxury Apartment

Để tìm thuê căn hộ Alphanam Luxury Apartment để sinh sống. Trước tiên bạn phải xác định tài chính hiện có của mình muốn chọn căn hộ 1 - 2 - 3 phòng ngủ hay căn hộ có đầy đủ nội thất hay cơ bản để có thể bố trí theo phong cách của mình. Tiếp theo thời gian thuê trong bao lâu, thuê với mục đích để làm việc, công tác hay thuê để gia đình ở dài hạn. Cho nên bạn cần phải nắm bắt được thời gian ở trong bao lâu thì sẽ chọn thuê căn hộ phù hợp.

Nơi tìm thuê căn hộ Alphanam Luxury Apartment
Nơi tìm thuê căn hộ Alphanam Luxury Apartment

Cuối cùng hãy tìm một nơi cho thuê căn hộ Alphanam Luxury Apartment phù hợp, một cái tên thường được nhắc đến là thuecanho123.com một trang web uy tín được nhiều người lựa chọn. Tại đây bạn có thể thoải mái tìm kiếm căn hộ bất kỳ lúc nào chỉ cần một chiếc điện thoại hay máy tính, chỉ cần truy cập vào website thuecanho123.com bạn sẽ tìm được căn hộ Alphanam Luxury Apartment phù hợp với tiêu chí mình đưa ra.

Chọn khu vực
  • Toàn quốc
  • Hồ Chí Minh
  • Hà Nội
  • Bình Dương
  • Đà Nẵng
  • Hải Phòng
  • Long An
  • Bà Rịa Vũng Tàu
  • An Giang
  • Bắc Giang
  • Bắc Kạn
  • Bạc Liêu
  • Bắc Ninh
  • Bến Tre
  • Bình Định
  • Bình Phước
  • Bình Thuận
  • Cà Mau
  • Cần Thơ
  • Cao Bằng
  • Đắk Lắk
  • Đắk Nông
  • Điện Biên
  • Đồng Nai
  • Đồng Tháp
  • Gia Lai
  • Hà Giang
  • Hà Nam
  • Hà Tĩnh
  • Hải Dương
  • Hậu Giang
  • Hòa Bình
  • Hưng Yên
  • Khánh Hòa
  • Kiên Giang
  • Kon Tum
  • Lai Châu
  • Lâm Đồng
  • Lạng Sơn
  • Lào Cai
  • Nam Định
  • Nghệ An
  • Ninh Bình
  • Ninh Thuận
  • Phú Thọ
  • Phú Yên
  • Quảng Bình
  • Quảng Nam
  • Quảng Ngãi
  • Quảng Ninh
  • Quảng Trị
  • Sóc Trăng
  • Sơn La
  • Tây Ninh
  • Thái Bình
  • Thái Nguyên
  • Thanh Hóa
  • Thừa Thiên Huế
  • Tiền Giang
  • Trà Vinh
  • Tuyên Quang
  • Vĩnh Long
  • Vĩnh Phúc
  • Yên Bái
Đà Nẵng
  • Tất cả
  • Cẩm Lệ
  • Hải Châu
  • Hòa Vang
  • Hoàng Sa
  • Liên Chiểu
  • Ngũ Hành Sơn
  • Sơn Trà
  • Thanh Khê
Sơn Trà
  • Tất cả
  • Phường Mân Thái
  • Phường Thọ Quang
  • Phường An Hải Tây
  • Phường Phước Mỹ
  • Phường An Hải Bắc
  • Phường An Hải Đông
  • Phường Nại Hiên Đông
Chọn khoảng giá
  • Tất cả
  • Dưới 5 triệu
  • 5 - 7 triệu
  • 7 - 10 triệu
  • 10 - 15 triệu
  • 15 - 20 triệu
  • 20 - 30 triệu
  • 30 - 50 triệu
  • 50 - 100 triệu
  • Trên 100 triệu
Chọn diện tích
  • Tất cả
  • Dưới 20m2
  • 20m2 - 30m2
  • 30m2 - 50m2
  • 50m2 - 70m2
  • 70m2 - 90m2
  • 90m2 - 120m2
  • 120m2 - 200m2
  • 200m2 - 500m2
  • Trên 500m2
Số phòng ngủ
  • Tất cả
  • 1 phòng ngủ
  • 2 phòng ngủ
  • 3 phòng ngủ
  • 4+ phòng ngủ
Số toilet
  • Tất cả
  • 1 toilet
  • 2 toilet
  • 3 toilet
  • 4+ toilet
Hướng chính
  • Tất cả
  • Đông
  • Tây
  • Nam
  • Bắc
  • Đông Nam
  • Đông Bắc
  • Tây Nam
  • Tây Bắc
Request history7MBMemory Usage
145 statements were executed, 92 of which were duplicates, 53 unique. Show only duplicated118ms
  • Connection Establishedtch123_dev_2020Khelper.php#2679
    Backtrace
    • 15. app/Helpers/Khelper.php:2679
    • 16. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 17. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 18. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • select * from `tch_redirects` where `status` = 1 and `url` = '/cho-thue-can-ho-chung-cu-alphanam-luxury-apartment.html' limit 13.91mstch123_dev_2020Khelper.php#2679
    Bindings
    • 0: 1
    • 1: /cho-thue-can-ho-chung-cu-alphanam-luxury-apartment.html
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/Khelper.php:2679
    • 17. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 18. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 19. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 20. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • - EXPLAIN # 1: `tch_redirects` (SIMPLE)18161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_redirects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1816
    • Extra: Using where
  • select * from `tch_pages` where `tch_pages`.`id` = 1 limit 1530μstch123_dev_2020PageHelper.php#58
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/PageHelper.php:58
    • 21. app/Helpers/Khelper.php:256
    • 22. middleware::page.hook:14
    • 23. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 24. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-alphanam-luxury-apartment' limit 1830μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-alphanam-luxury-apartment
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. middleware::page.hook:16
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 20. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)360μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)580μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2868) and `tch_projects`.`deleted_at` is null700μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)410μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-alphanam-luxury-apartment' limit 1480μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-alphanam-luxury-apartment
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. app/Http/Controllers/PageController.php:37
    • 19. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 20. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)320μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)330μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2868) and `tch_projects`.`deleted_at` is null350μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)320μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, `name`, `code`, `total_posts` from `tch_provinces` order by `ordering` asc, `slug` asc440μstch123_dev_2020LocationHelper.php#24
    Hints
    • 0: The SELECT statement has no WHERE clause and could examine many more rows than intended
    Backtrace
    • 15. app/Helpers/LocationHelper.php:24
    • 16. app/Helpers/Khelper.php:1972
    • 17. app/Services/Page/PageService.php:377
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)631
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 63
    • Extra: Using filesort
  • select * from `tch_global_option` where `name` = 'post_paging' limit 1390μstch123_dev_2020Setting.php#23
    Bindings
    • 0: post_paging
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Services/Page/PageService.php:362
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select count(*) as aggregate from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2868 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null1.15mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2868
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_status_out_of_service_ordering_deleted_at
    • key_len: 312
    • ref: const,const,const,const
    • rows: 8
    • Extra: Using where; Using index
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select `tch_posts`.* from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2868 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null order by `tch_posts`.`ordering` desc, `tch_posts`.`published_at` desc limit 20 offset 01.52mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2868
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_deleted_at
    • key_len: 13
    • ref: const,const,const
    • rows: 8
    • Extra: Using index condition; Using where; Using filesort
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select * from `tch_packages` where `tch_packages`.`id` in (31)420μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180146443, 180149182, 180149188, 180156988, 180160410, 180165011, 180165338, 180168653)680μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 8
    • Extra: Using index condition
  • select * from `tch_post_apartment_expands` where `tch_post_apartment_expands`.`post_id` in (180146443, 180149182, 180149188, 180156988, 180160410, 180165011, 180165338, 180168653)1.13mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_expands` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_expands
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 8
    • Extra: Using index condition
  • select * from `tch_projects` where `tch_projects`.`id` in (2868) and `tch_projects`.`deleted_at` is null280μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` > 0 and `project_id` > 0 and `tch_pages`.`project_id` in (2868)23.52mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 2868
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)240μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` = 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`province_id` in (4)330μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 0
    • 4: 4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (69)210μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`district_id` in (69)22.61mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_users` where `tch_users`.`id` in (1439, 5223, 5708) and `tch_users`.`deleted_at` is null580μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_users` (SIMPLE)31
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_users
    • type: range
    • possible_keys: PRIMARY,deleted_at
    • key: deleted_at
    • key_len: 9
    • ref: 
    • rows: 3
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` = 4 limit 1390μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/Khelper.php:195
    • 19. app/Services/Page/PageService.php:427
    • 20. app/Services/Page/PageService.php:32
    • 21. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (4) order by `ordering` asc, `id_province` asc, `name` asc220μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/Khelper.php:195
    • 24. app/Services/Page/PageService.php:427
    • 25. app/Services/Page/PageService.php:32
    • 26. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 8
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 4 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc280μstch123_dev_2020Province.php#28
    Bindings
    • 0: 4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Services/Page/PageService.php:427
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 8
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id` = 69 limit 1440μstch123_dev_2020LocationHelper.php#322
    Bindings
    • 0: 69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:322
    • 21. app/Helpers/Khelper.php:207
    • 22. app/Services/Page/PageService.php:430
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, CONCAT(pre," ",name) as text, CONCAT(pre," ",name) as name from `tch_wards` where `tch_wards`.`id_district` = 69 and `tch_wards`.`id_district` is not null order by LENGTH(name) ASC, CAST(name AS UNSIGNED) , `name` asc690μstch123_dev_2020District.php#34
    Bindings
    • 0: 69
    Backtrace
    • 16. app/Models/District.php:34
    • 17. app/Services/Page/PageService.php:430
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: ref
    • possible_keys: id_district
    • key: id_district
    • key_len: 4
    • ref: const
    • rows: 7
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = 5 limit 1300μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:183
    • 18. app/Helpers/Khelper.php:2292
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (0)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_districts` where `tch_districts`.`id` in (0)450μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_4' limit 1360μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:189
    • 18. app/Helpers/Khelper.php:2306
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_4_69' limit 1480μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_4_69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:216
    • 18. app/Helpers/Khelper.php:2307
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1270μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2346
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_4_69_project_2868' limit 1480μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_4_69_project_2868
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:303
    • 18. app/Helpers/Khelper.php:2350
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2868) and `tch_projects`.`deleted_at` is null260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1240μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2355
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_4' limit 1320μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.khuvuc:4
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 4 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc450μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 4
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.khuvuc:5
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)1241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 124
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (63, 64, 67, 68, 69, 70)340μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)61
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 6
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1400μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1210μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1200μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1210μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1200μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`parent_id` = 2868 and `tch_projects`.`parent_id` is not null and `tch_projects`.`deleted_at` is null4.06mstch123_dev_2020page_part_project_childs.blade.php#13
    Bindings
    • 0: 2868
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.page.page_part.page_part_project_childs:13
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)15401
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1540
    • Extra: Using where
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select project_id, COUNT(*) as total from `tch_posts` where `district_id` = 69 and `created_at` > '2025-02-16 00:00:00' and `project_id` > 0 and `tch_posts`.`deleted_at` is null group by `project_id` having COUNT(*) > 0 order by COUNT(*) DESC limit 20800μstch123_dev_2020ProjectHelper.php#255
    Bindings
    • 0: 69
    • 1: 2025-02-16 00:00:00
    • 2: 0
    • 3: 0
    Backtrace
    • 15. app/Helpers/ProjectHelper.php:255
    • 16. view::_desktop.main.page.page_part.page_part_project:8
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: range
    • possible_keys: project_id_published_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at,district_id_published_status_out_of_service_deleted_at,created_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 1
    • Extra: Using index condition; Using where; Using temporary; Using filesort
  • select * from `tch_pages` where `project_id` > '0' and `province_id` = 4 and `count` > 0 and `district_id` = 69 order by `count` desc, `created_at` desc limit 156.25mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 4
    • 2: 0
    • 3: 69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:19
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)18271
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: count_deleted_at
    • key: count_deleted_at
    • key_len: 4
    • ref: 
    • rows: 1827
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)350μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)350μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)330μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (1913, 1916, 1923, 1927, 1932, 1934, 1935, 2865, 2868, 2874, 3043, 3051) and `tch_projects`.`deleted_at` is null750μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 12
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `project_id` > '0' and `district_id` = 69 and 1 = 1 order by `created_at` desc limit 57.07mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:20
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (4)320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (69)310μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)290μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (2955, 2964, 3043, 3051, 3116) and `tch_projects`.`deleted_at` is null570μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)300μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `tch_posts`.* from `tch_posts` where not exists (select * from `tch_promote_post_histories` where `tch_posts`.`id` = `tch_promote_post_histories`.`post_id` and `type` = 'RECREATEPOST' and `tch_promote_post_histories`.`deleted_at` is null) and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`status` = 'approved' and `tch_posts`.`deleted_at` is null order by `tch_posts`.`created_at` desc limit 10540μstch123_dev_2020PostHelper.php#621
    Bindings
    • 0: RECREATEPOST
    • 1: 1
    • 2: 0
    • 3: approved
    Backtrace
    • 15. app/Helpers/PostHelper.php:621
    • 16. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (PRIMARY)201
    Params
    • id: 1
    • select_type: PRIMARY
    • table: tch_posts
    • type: index
    • possible_keys: out_of_service_deleted_at,status_published_out_of_service_ordering_deleted_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 20
    • Extra: Using where
  • - EXPLAIN # 2: `tch_promote_post_histories` (MATERIALIZED)3435602
    Params
    • id: 2
    • select_type: MATERIALIZED
    • table: tch_promote_post_histories
    • type: ALL
    • possible_keys: post_id,type,deleted_at
    • key: 
    • key_len: 
    • ref: 
    • rows: 343560
    • Extra: Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 33, 34, 37)360μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: ALL
    • possible_keys: PRIMARY
    • key: 
    • key_len: 
    • ref: 
    • rows: 7
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1, 2)310μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (9, 11, 14, 21, 27)280μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180223418, 180223419, 180223420, 180223421, 180223423, 180223424, 180223425, 180223429, 180223432, 180223433)300μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)101
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 10
    • Extra: Using index condition
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_articles` where `published` = 1 and `tch_articles`.`deleted_at` is null order by `created_at` desc limit 5410μstch123_dev_2020ArticleHelper.php#173
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/ArticleHelper.php:173
    • 16. app/Helpers/Khelper.php:2973
    • 17. view::_desktop.main.page.page_part.page_part_lastest_articles:22
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_articles` (SIMPLE)6641
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_articles
    • type: ref
    • possible_keys: published_deleted_at,deleted_at
    • key: deleted_at
    • key_len: 5
    • ref: const
    • rows: 664
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = '5_1' limit 1340μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:3
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)190μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc920μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:4
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)290μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1350μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:6
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc480μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:7
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)220μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)430μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)400μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_3' limit 1480μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_3
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:9
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)300μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null340μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 3 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc630μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 3
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:10
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)2221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 222
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)320μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (56, 58, 60, 61, 62)390μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)320μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_promotions` where `published` = 1 and date(`date_begin`) <= '2025-04-17' and date(`date_end`) >= '2025-04-17' order by `priority` desc limit 1430μstch123_dev_2020header_user_not_login.blade.php#3
    Bindings
    • 0: 1
    • 1: 2025-04-17
    • 2: 2025-04-17
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.includes.header_user_not_login:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_promotions` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_promotions
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1410μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:2
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (1) order by `ordering` asc, `id_province` asc, `name` asc370μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:2
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 1 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc460μstch123_dev_2020Province.php#28
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:2
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1400μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:3
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (2) order by `ordering` asc, `id_province` asc, `name` asc440μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:3
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 2 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc480μstch123_dev_2020Province.php#28
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:3
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 4 limit 1420μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 4
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:17
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` = 69 limit 1310μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 69
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:18
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 1051 limit 1640μstch123_dev_2020LocationHelper.php#284
    Bindings
    • 0: 1051
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:284
    • 21. app/Helpers/Khelper.php:199
    • 22. app/Http/Resources/ProjectResource.php:19
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_streets` where `tch_streets`.`id` = 7598 limit 1780μstch123_dev_2020LocationHelper.php#303
    Bindings
    • 0: 7598
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:303
    • 21. app/Helpers/Khelper.php:203
    • 22. app/Http/Resources/ProjectResource.php:20
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_streets` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_streets
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'address' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: address
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. view::_desktop.main.includes.footer:50
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
App\Models\District
187District.php#?
App\Models\Province
85Province.php#?
App\Models\Page
80Page.php#?
App\Models\Project
21Project.php#?
App\Models\PostCanHoDetail
18PostCanHoDetail.php#?
App\Models\Estate
16Estate.php#?
App\Models\PostCanHoExpand
8PostCanHoExpand.php#?
App\Models\Ward
8Ward.php#?
App\Models\Package
5Package.php#?
App\Models\Article
5Article.php#?
App\Models\User
3User.php#?
App\Models\Street
1Street.php#?
ClearShow all
Date ↕MethodURLData
#12025-04-17 14:38:17GET/cho-thue-can-ho-chung-cu-alphanam-luxury-apartment.html145437