Quận 2, Hồ Chí Minh
Dự án
Chọn giá
Diện tích
1 phòng ngủ
Số toilet
Hướng chính
Đặt lại

Cho Thuê Căn Hộ Chung Cư Empire City Thủ Thiêm Mới Nhất T4/2025

Hiện có 203 căn hộ cho thuê

CHO THUÊ CĂN HỘ CHUNG CƯ EMPIRE CITY THỦ THIÊM

Empire City là khu phức hợp với vị trí đắc địa ngay khu đô thị mới Thủ Thiêm và mặt tiền sông Sài Gòn. Ngay sau khi mở bán, từ khóa "thuê căn hộ Empire City Thủ Thiêm" đã được giới thượng lưu quan tâm và tìm kiếm. Hiện có 706 tin đăng cho thuê căn hộ chung cư Empire City Thủ Thiêm trên hệ thống của Thuecanho123. Hãy cùng tham khảo bảng giá thuê và những lý do tại sao nên thuê căn hộ tại dự án này.

Cho thuê căn hộ chung cư Empire City Thủ Thiêm
Cho thuê căn hộ chung cư Empire City Thủ Thiêm

Giá cho thuê căn hộ chung cư Empire City Thủ Thiêm T4/2025

Theo thống kê đáng tin cậy từ Thuecanho123.com, giá thuê căn hộ Empire City Thủ Thiêm mới nhất dao động từ 20 - 135 triệu/tháng. Mức giá này có sự chênh lệch tùy thuộc vào từng phân khu, số phòng, diện tích,... và còn phụ thuộc vào từng giai đoạn của thị trường bất động sản. Dưới đây là bảng giá mà chúng tôi đã tổng hợp:

BẢNG GIÁ CHO THUÊ CĂN HỘ TẠI EMPIRE CITY THỦ THIÊM T4/2025
Loại căn hộ Giá thuê
Giá thuê căn hộ tòa Linden Residences 1PN (63,8 - 64,2m²) 18 - 24 triệu/tháng
Giá thuê căn hộ tòa Linden Residences 2PN (91 - 93m²) 24 triệu/tháng
Giá thuê căn hộ tòa Linden Residences 3PN (127 - 148m²) 48 - 55 triệu/tháng
Giá thuê căn hộ tòa Tilia Residences 1PN (59 - 64,62m²) 18 - 24 triệu/tháng
Giá thuê căn hộ tòa Tilia Residences 2PN (98 - 93,5m²) 25 - 35 triệu/tháng
Giá thuê căn hộ tòa Tilia Residences 3PN (127 - 148m²) 40 - 65 triệu/tháng
Giá thuê căn hộ tòa Tilia Residences Duplex (203m²) 80 - 90 triệu/tháng
Giá thuê căn hộ tòa Tilia Residences Penthouse (380m²) Đang cập nhật

Tại sao nên chọn thuê căn hộ chung cư Empire City Thủ Thiêm

1. Vị trí lõi trung tâm khu đô thị mới

Empire City tọa lạc tại một vị trí vô cùng đắc địa ngay lõi trung tâm khu đô thị mới Thủ Thiêm. Từ vị trí này, cư dân có thể dễ dàng kết nối đến trung tâm như quận 1 chưa tới 5 phút. Hơn nữa, việc di chuyển sang các quận lân cận như quận 2, quận 4, quận 7, Bình Thạnh, TP Thủ Đức,... cũng dễ dàng hơn.

- Sát bên đại lộ Mai Chí Thọ, đại lộ Đông Tây.

- Cách chợ Bến Thành chỉ 3km (10 phút).

- Cách Thảo Điền (Quận 2) 3km (15 phút).

- Cách Phú Mỹ Hưng (Quận 7) chỉ 5km (20 phút).

- Cách cao tốc TPHCM - Long Thành - Dầu Giây chỉ 5km (15 phút).

- Cách sân bay quốc tế Tân Sơn Nhất 6km (20 phút).

Vị trí dự án Empire City Thủ Thiêm
Vị trí dự án Empire City Thủ Thiêm

Mặt khác, dự án còn nằm trong khu chức năng 2B, nên việc kết nối sang các khu vực khác cũng thuận tiện hơn:

- Khu thương mại dịch vụ đa chức năng.

- Khu phức hợp thương mại, dân cư, thể thao và giải trí.

- Khu chức năng dân cư hỗn hợp (dưới chân cầu Thủ Thiêm 1).

- Khu công trình cộng đồng (cung thiếu nhi và cơ quan hành chính đô thị).

- Khu công viên phần mềm và bệnh viện quốc tế.

- Khu nhà cao tầng và khách sạn nghỉ dưỡng.

- Khu phát triển sinh học đa năng.

2. Chuỗi tiện ích tiêu chuẩn quốc tế 5 sao

Kiến trúc của dự án Empire City được thiết kế theo mô hình không gian xanh ngay giữa lòng thành phố. Góp phần kiến tạo không gian sống, làm việc và vui chơi đẳng cấp với hệ thống tiện ích cao cấp đạt tiêu chuẩn quốc tế 5 sao.

Chuỗi tiện ích chung:

- Quảng trường trung tâm rộng rãi, thoáng mát.

- Hồ bơi đa năng phục vụ nhu cầu bơi lội, thư giãn của mọi lứa tuổi.

- Sân vườn nội khu và ngoài trời được thiết kế hài hòa với thiên nhiên.

- Khu vui chơi trẻ em nội khu và ngoài trời, đảm bảo an toàn cho các bé.

- Trung tâm thể thao hiện đại với phòng gym, sân tennis, khu tập yoga,...

- Khu ẩm thực phong phú với đa dạng nhà hàng, quán cà phê, khu BBQ.

- Vườn nướng BBQ ngoài trời, thích hợp cho những buổi tụ tập bạn bè.

- Hệ thống camera giám sát hiện đại, đội an ninh tuần tra thường xuyên đảm bảo an ninh 24/7.

- Nút bấm intercom kết nối trực tiếp giữa căn hộ và phòng trực an ninh

Tiện ích đa nhiệm phục vụ tận nhà:

- Dịch vụ chăm sóc sức khỏe bởi bác sĩ gia đình, nút bấm y tế tại nhà kết nối trực tiếp với hệ thống y tế Vinmec.

- Dịch vụ chăm vườn, dọn bể bơi, bảo trì máy móc thiết bị,...

- Dịch vụ dọn xe, rửa xe, kiểm tra xe định kỳ và bảo trì sửa chữa nhỏ.

- Trung tâm dịch vụ khách hàng sẵn sàng phục vụ 24/7, cung cấp dịch vụ tại gia tiện lợi.

Thuê căn hộ Empire City chắc chắn sẽ mang đến cho cư dân cuộc sống đẳng cấp và đầy tiện nghi trong một "hòn ngọc xanh mát" giữa lòng thành phố.

3. Thiết kế hiện đại và sang trọng chuẩn Châu Âu

Tọa lạc tại vị trí đắc địa tại Khu đô thị mới Thủ Thiêm, Empire City Thủ Thiêm là khu phức hợp cao cấp với quy mô lên đến 14,5ha. Dự án sở hữu 3.700 căn hộ cao cấp, trung tâm thương mại, chuỗi văn phòng, khách sạn 5 sao, tầng hầm đỗ xe,...

Đặc biệt, dự án nổi bật với các phân khu:

- Empire 88: Tòa tháp văn phòng cao 88 tầng, là trung tâm kết nối giao thương, hội tụ đầy đủ các chức năng thương mại, dịch vụ tiện ích vượt trội.

- Phân khu Narra Residences đặc trưng với 2 phong cách thiết kế "Năng Động" cùng "Văn Hóa Thời Thượng".

- Phân khu Cove Residences "Đơn giản - Hiện đại - Tinh tế - Tự nhiên" từ vật liệu đến các đường nét thiết kế.

- Phân khu Tilia Residences mang đến cuộc sống đô thị hiện đại và chất lượng mà không cần lo lắng ùn tắc giao thông, hạn chế về hạ tầng cũng như không gian sống chật hẹp.

- Phân khu Linden Residences được thiết kế với các tòa tháp bố trí so le nhau. Chính vì thế, 100% căn hộ tại đây đều có thể đón ánh sáng, đón gió trời tự nhiên cả ngày. 

4. Liên doanh chủ đầu tư uy tín

Đằng sau thành công của Empire City Thủ Thiêm là sự hợp tác chặt chẽ giữa 3 nhà đầu tư uy tín, tạo nên "liên minh vàng" trong lĩnh vực bất động sản. Trong đó bao gồm:

Gaw Capital Partners

- Là tập đoàn đa quốc gia với trụ sở chính tại Hồng Kông, sở hữu quỹ đầu tư tư nhân lớn, chuyên đầu tư vào các dự án bất động sản tiềm năng trên thế giới.

- Được thành lập bởi hai nhà sáng lập Goodwin GAW và Kenneth GAW, những chuyên gia dày dặn kinh nghiệm trong lĩnh vực BĐS tại Bắc Mỹ và châu Á.

- Gaw Capital Partners góp 30% vốn vào dự án Empire City, tạo nên nền tảng tài chính vững chắc cho dự án.

Keppel Land

- Tập đoàn bất động sản hàng đầu Singapore, tiên phong trong việc đầu tư và phát triển các dự án quy mô lớn tại Việt Nam.

- Keppel Land sở hữu 20 dự án BĐS tại Việt Nam với định hướng phát triển hơn 25.000 căn hộ.

- Tập đoàn góp 40% vốn vào dự án Empire City, mang đến tiềm lực mạnh mẽ và uy tín thương hiệu cho dự án.

Tiến Phước và Trần Thái (Việt Nam)

- Hai công ty BĐS uy tín tại Việt Nam với hơn 15 năm kinh nghiệm trong lĩnh vực phát triển dự án.

- Tiến Phước và Trần Thái đã gặt hái nhiều thành công vang dội với các dự án nổi tiếng như: Khu đô thị Sala, Khu đô thị D2D Centropolis, Khu đô thị Vinhomes Central Park,...

- Hai công ty góp 30% vốn và cùng chung tay xây dựng Empire City trở thành biểu tượng mới của Sài Gòn.

Với sự kết hợp hoàn hảo giữa 3 "ông lớn" bất động sản này sẽ đảm bảo cho sự thành công của Empire City. Không chỉ mang đến cho khách hàng thuê căn hộ hộ Empire City không gian sống đẳng cấp, mà còn mở ra tiềm năng đầu tư sinh lời hấp dẫn.

5. Xây dựng nhanh chóng, đúng tiến độ

Dự án Empire City Thủ Thiêm đang được triển khai xây dựng nhanh chóng, đúng tiến độ đã đề ra. Dự kiến đến năm 2023, toàn bộ dự án sẽ hoàn thành và bàn giao căn hộ cho cư dân. Tiến độ xây dựng được chia thành 4 giai đoạn:

- Giai đoạn 1 thi công 2 tòa tháp MU4 (phân khu Linden Residences) và MU7 (Tilia Residences).

- Giai đoạn 2 thi công 2 tòa tháp MU8 và MU11 (phân khu Cove Residences).

- Giai đoạn 3 thi công 2 tháp MU9 và MU10.

- Giai đoạn 4 thi công các tòa tháp còn lại gồm MU1, MU2, MU3, MU5, MU6.

Tiến độ thi công và bàn giao:

- Mở bán phân khu Linden Residences (MU4) năm 2016.

- Mở bán phân khu Tilia Residences (MU7) năm 2017.

- Mở bán phân khu Cove Residences (MU11) năm 2018.

- Mở bán phân khu Narra Residences (MU8) quý II/2019.

- Cất nóc phân khu Linden Residence Empire City tháng 3/2020.

- Bàn giao căn hộ thuộc phân khu Linden Residence Empire City tháng 4/2020.

- Hoàn thiện và bàn giao căn hộ thuộc phân khu Tilia Residences quý I/2021.

- Bàn giao căn hộ thuộc phân khu Cove Residences quý IV/2022.

- Hoàn thiện các hạng mục của phân khu Narra Residences đầu 2023.

Cập nhật tiến độ tháng 5/2024:

- 3 tòa tháp đã hoàn thiện và bàn giao: Linden Residences, Tilia Residences và Cove Residences.

- Phân khu Narra Residences đang trong giai đoạn hoàn thiện các hạng mục cuối cùng.

Website tìm kiếm và đăng tin cho thuê căn hộ chung cư Empire City Thủ Thiêm

Bạn đang tìm thuê căn hộ chung cư ưng ý tại Empire City Thủ Thiêm? Hay bạn muốn cho thuê căn hộ của mình một cách hiệu quả? Thuecanho123 sẽ là giải pháp hoàn hảo dành cho bạn ngay lúc này. Thuecanho123.com là một trong những website hàng đầu tại Việt Nam về tìm kiếm và đăng tin cho thuê căn hộ chung cư Empire City Thủ Thiêm. Tại đây, website sở hữu kho tin đăng cho thuê căn hộ chung cư Empire City Thủ Thiêm đa dạng, phong phú và cập nhật liên tục. Khách thuê có thể dễ dàng tìm kiếm căn hộ phù hợp với tiêu chí về giá cả, diện tích, số phòng ngủ, vị trí, tiện ích... chỉ trong vài cú nhấp chuột.

Thuê căn hộ Empire City Thủ Thiêm tại Thuecanho123.com
Thuê căn hộ Empire City Thủ Thiêm tại Thuecanho123.com

Mặt khác, chỉ cần vài thao tác đơn giản, chủ nhà có thể đăng tin cho thuê căn hộ của mình một cách dễ dàng. Đặc biệt, Thuecanho123 còn cung cấp các gói đăng tin đa dạng. giúp khách cho thuê tiếp cận hàng triệu khách thuê tiềm năng. Ngoài ra, đội ngũ CSKH chuyên nghiệp của chúng tôi luôn sẵn sàng hỗ trợ bạn giải đáp mọi thắc mắc liên quan đến việc tìm kiếm hoặc cho thuê căn hộ. Hãy liên hệ ngay vào HOTLINE 0839202123 để được tư vấn 24/7 nhé!

Chọn khu vực
  • Toàn quốc
  • Hồ Chí Minh
  • Hà Nội
  • Bình Dương
  • Đà Nẵng
  • Hải Phòng
  • Long An
  • Bà Rịa Vũng Tàu
  • An Giang
  • Bắc Giang
  • Bắc Kạn
  • Bạc Liêu
  • Bắc Ninh
  • Bến Tre
  • Bình Định
  • Bình Phước
  • Bình Thuận
  • Cà Mau
  • Cần Thơ
  • Cao Bằng
  • Đắk Lắk
  • Đắk Nông
  • Điện Biên
  • Đồng Nai
  • Đồng Tháp
  • Gia Lai
  • Hà Giang
  • Hà Nam
  • Hà Tĩnh
  • Hải Dương
  • Hậu Giang
  • Hòa Bình
  • Hưng Yên
  • Khánh Hòa
  • Kiên Giang
  • Kon Tum
  • Lai Châu
  • Lâm Đồng
  • Lạng Sơn
  • Lào Cai
  • Nam Định
  • Nghệ An
  • Ninh Bình
  • Ninh Thuận
  • Phú Thọ
  • Phú Yên
  • Quảng Bình
  • Quảng Nam
  • Quảng Ngãi
  • Quảng Ninh
  • Quảng Trị
  • Sóc Trăng
  • Sơn La
  • Tây Ninh
  • Thái Bình
  • Thái Nguyên
  • Thanh Hóa
  • Thừa Thiên Huế
  • Tiền Giang
  • Trà Vinh
  • Tuyên Quang
  • Vĩnh Long
  • Vĩnh Phúc
  • Yên Bái
Hồ Chí Minh
  • Tất cả
  • Quận 1
  • Quận 2
  • Quận 3
  • Quận 4
  • Quận 5
  • Quận 6
  • Quận 7
  • Quận 8
  • Quận 9
  • Quận 10
  • Quận 11
  • Quận 12
  • Bình Tân
  • Bình Thạnh
  • Gò Vấp
  • Phú Nhuận
  • Tân Bình
  • Tân Phú
  • Thủ Đức
  • Bình Chánh
  • Cần Giờ
  • Củ Chi
  • Hóc Môn
  • Nhà Bè
Quận 2
  • Tất cả
  • Phường An Phú
  • Phường Bình An
  • Phường An Khánh
  • Phường Cát Lái
  • Phường Bình Khánh
  • Phường Thủ Thiêm
  • Phường Thảo Điền
  • Phường An Lợi Đông
  • Phường Bình Trưng Tây
  • Phường Thạnh Mỹ Lợi
  • Phường Bình Trưng Đông
Chọn khoảng giá
  • Tất cả
  • Dưới 5 triệu
  • 5 - 7 triệu
  • 7 - 10 triệu
  • 10 - 15 triệu
  • 15 - 20 triệu
  • 20 - 30 triệu
  • 30 - 50 triệu
  • 50 - 100 triệu
  • Trên 100 triệu
Chọn diện tích
  • Tất cả
  • Dưới 20m2
  • 20m2 - 30m2
  • 30m2 - 50m2
  • 50m2 - 70m2
  • 70m2 - 90m2
  • 90m2 - 120m2
  • 120m2 - 200m2
  • 200m2 - 500m2
  • Trên 500m2
Số phòng ngủ
  • Tất cả
  • 1 phòng ngủ
  • 2 phòng ngủ
  • 3 phòng ngủ
  • 4+ phòng ngủ
Số toilet
  • Tất cả
  • 1 toilet
  • 2 toilet
  • 3 toilet
  • 4+ toilet
Hướng chính
  • Tất cả
  • Đông
  • Tây
  • Nam
  • Bắc
  • Đông Nam
  • Đông Bắc
  • Tây Nam
  • Tây Bắc
Request history8MBMemory Usage
170 statements were executed, 125 of which were duplicates, 45 unique. Show only duplicated93.36ms
  • Connection Establishedtch123_dev_2020Khelper.php#2679
    Backtrace
    • 15. app/Helpers/Khelper.php:2679
    • 16. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 17. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 18. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • select * from `tch_redirects` where `status` = 1 and `url` = '/cho-thue-can-ho-chung-cu-empire-city-thu-thiem.html' limit 12.7mstch123_dev_2020Khelper.php#2679
    Bindings
    • 0: 1
    • 1: /cho-thue-can-ho-chung-cu-empire-city-thu-thiem.html
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/Khelper.php:2679
    • 17. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 18. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 19. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 20. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • - EXPLAIN # 1: `tch_redirects` (SIMPLE)18161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_redirects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1816
    • Extra: Using where
  • select * from `tch_pages` where `tch_pages`.`id` = 1 limit 1370μstch123_dev_2020PageHelper.php#58
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/PageHelper.php:58
    • 21. app/Helpers/Khelper.php:256
    • 22. middleware::page.hook:14
    • 23. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 24. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-empire-city-thu-thiem' limit 1560μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-empire-city-thu-thiem
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. middleware::page.hook:16
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 20. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)300μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)300μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (402) and `tch_projects`.`deleted_at` is null320μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)300μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-empire-city-thu-thiem' limit 1320μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-empire-city-thu-thiem
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. app/Http/Controllers/PageController.php:37
    • 19. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 20. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)240μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)230μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (402) and `tch_projects`.`deleted_at` is null260μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, `name`, `code`, `total_posts` from `tch_provinces` order by `ordering` asc, `slug` asc420μstch123_dev_2020LocationHelper.php#24
    Hints
    • 0: The SELECT statement has no WHERE clause and could examine many more rows than intended
    Backtrace
    • 15. app/Helpers/LocationHelper.php:24
    • 16. app/Helpers/Khelper.php:1972
    • 17. app/Services/Page/PageService.php:377
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)631
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 63
    • Extra: Using filesort
  • select * from `tch_global_option` where `name` = 'post_paging' limit 1280μstch123_dev_2020Setting.php#23
    Bindings
    • 0: post_paging
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Services/Page/PageService.php:362
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select count(*) as aggregate from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `so_phong_ngu` = '1' and `project_id` = 402 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null4.05mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 1
    • 1: 402
    • 2: approved
    • 3: 1
    • 4: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)8001
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: PRIMARY,out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_status_out_of_service_ordering_deleted_at
    • key_len: 312
    • ref: const,const,const,const
    • rows: 800
    • Extra: Using where; Using index
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using index condition; Using where
  • select `tch_posts`.* from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `so_phong_ngu` = '1' and `project_id` = 402 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null order by `tch_posts`.`ordering` desc, `tch_posts`.`published_at` desc limit 20 offset 07.06mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 1
    • 1: 402
    • 2: approved
    • 3: 1
    • 4: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)7071
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: PRIMARY,out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_deleted_at
    • key_len: 13
    • ref: const,const,const
    • rows: 707
    • Extra: Using index condition; Using where; Using filesort
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using index condition; Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31)250μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180200298, 180200795, 180202278, 180203181, 180204100, 180204154, 180204587, 180205330, 180206929, 180207033, 180207489, 180207632, 180208101, 180208247, 180211975, 180215043, 180215190, 180217801, 180219336, 180219955)690μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_post_apartment_expands` where `tch_post_apartment_expands`.`post_id` in (180200298, 180200795, 180202278, 180203181, 180204100, 180204154, 180204587, 180205330, 180206929, 180207033, 180207489, 180207632, 180208101, 180208247, 180211975, 180215043, 180215190, 180217801, 180219336, 180219955)1.2mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_expands` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_expands
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_projects` where `tch_projects`.`id` in (402) and `tch_projects`.`deleted_at` is null360μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` > 0 and `project_id` > 0 and `tch_pages`.`project_id` in (402)21.96mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 402
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)220μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` = 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`province_id` in (1)350μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 0
    • 4: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (14)240μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`district_id` in (14)360μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_users` where `tch_users`.`id` in (1343, 2277, 2284, 2399, 4850, 4936, 5540, 5822, 7785, 8734, 8737, 9976, 10345, 10672, 13806) and `tch_users`.`deleted_at` is null920μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_users` (SIMPLE)151
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_users
    • type: range
    • possible_keys: PRIMARY,deleted_at
    • key: deleted_at
    • key_len: 9
    • ref: 
    • rows: 15
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1280μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/Khelper.php:195
    • 19. app/Services/Page/PageService.php:427
    • 20. app/Services/Page/PageService.php:32
    • 21. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (1) order by `ordering` asc, `id_province` asc, `name` asc330μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/Khelper.php:195
    • 24. app/Services/Page/PageService.php:427
    • 25. app/Services/Page/PageService.php:32
    • 26. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 1 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc330μstch123_dev_2020Province.php#28
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Services/Page/PageService.php:427
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id` = 14 limit 1290μstch123_dev_2020LocationHelper.php#322
    Bindings
    • 0: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:322
    • 21. app/Helpers/Khelper.php:207
    • 22. app/Services/Page/PageService.php:430
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, CONCAT(pre," ",name) as text, CONCAT(pre," ",name) as name from `tch_wards` where `tch_wards`.`id_district` = 14 and `tch_wards`.`id_district` is not null order by LENGTH(name) ASC, CAST(name AS UNSIGNED) , `name` asc510μstch123_dev_2020District.php#34
    Bindings
    • 0: 14
    Backtrace
    • 16. app/Models/District.php:34
    • 17. app/Services/Page/PageService.php:430
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)111
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: ref
    • possible_keys: id_district
    • key: id_district
    • key_len: 4
    • ref: const
    • rows: 11
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = 5 limit 1310μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:183
    • 18. app/Helpers/Khelper.php:2292
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (0)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_districts` where `tch_districts`.`id` in (0)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1' limit 1360μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:189
    • 18. app/Helpers/Khelper.php:2306
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1_14' limit 1340μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:216
    • 18. app/Helpers/Khelper.php:2307
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1270μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2346
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1_14_project_402' limit 1680μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_14_project_402
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:303
    • 18. app/Helpers/Khelper.php:2350
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (402) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1260μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2355
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1' limit 1330μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.khuvuc:4
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc1.35mstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.khuvuc:5
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)270μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)320μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)270μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1260μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1230μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1200μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1200μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1400μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1370μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1380μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1350μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1390μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1370μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1340μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1340μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1280μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1300μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1320μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1310μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1310μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1350μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1300μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1360μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`parent_id` = 402 and `tch_projects`.`parent_id` is not null and `tch_projects`.`deleted_at` is null4.73mstch123_dev_2020page_part_project_childs.blade.php#13
    Bindings
    • 0: 402
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.page.page_part.page_part_project_childs:13
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)15401
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1540
    • Extra: Using where
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1330μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1280μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1320μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1290μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1330μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1290μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select project_id, COUNT(*) as total from `tch_posts` where `district_id` = 14 and `created_at` > '2025-02-10 00:00:00' and `project_id` > 0 and `tch_posts`.`deleted_at` is null group by `project_id` having COUNT(*) > 0 order by COUNT(*) DESC limit 20310μstch123_dev_2020ProjectHelper.php#255
    Bindings
    • 0: 14
    • 1: 2025-02-10 00:00:00
    • 2: 0
    • 3: 0
    Backtrace
    • 15. app/Helpers/ProjectHelper.php:255
    • 16. view::_desktop.main.page.page_part.page_part_project:8
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: range
    • possible_keys: project_id_published_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at,district_id_published_status_out_of_service_deleted_at,created_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 1
    • Extra: Using index condition; Using where; Using temporary; Using filesort
  • select * from `tch_pages` where `project_id` > '0' and `province_id` = 1 and `count` > 0 and `district_id` = 14 order by `count` desc, `created_at` desc limit 151.04mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 1
    • 2: 0
    • 3: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:19
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)18271
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: count_deleted_at
    • key: count_deleted_at
    • key_len: 4
    • ref: 
    • rows: 1827
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)280μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)230μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (402, 404, 405, 420, 422, 426, 450, 462, 2434, 2450, 2493, 2530, 2537, 2649, 2881) and `tch_projects`.`deleted_at` is null590μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)151
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 15
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `project_id` > '0' and `district_id` = 14 and 1 = 1 order by `created_at` desc limit 5690μstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:20
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)220μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)210μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)210μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (3083, 3129, 3131, 3133, 3165) and `tch_projects`.`deleted_at` is null320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)260μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `tch_posts`.* from `tch_posts` where not exists (select * from `tch_promote_post_histories` where `tch_posts`.`id` = `tch_promote_post_histories`.`post_id` and `type` = 'RECREATEPOST' and `tch_promote_post_histories`.`deleted_at` is null) and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`status` = 'approved' and `tch_posts`.`deleted_at` is null order by `tch_posts`.`created_at` desc limit 10460μstch123_dev_2020PostHelper.php#621
    Bindings
    • 0: RECREATEPOST
    • 1: 1
    • 2: 0
    • 3: approved
    Backtrace
    • 15. app/Helpers/PostHelper.php:621
    • 16. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (PRIMARY)201
    Params
    • id: 1
    • select_type: PRIMARY
    • table: tch_posts
    • type: index
    • possible_keys: out_of_service_deleted_at,status_published_out_of_service_ordering_deleted_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 20
    • Extra: Using where
  • - EXPLAIN # 2: `tch_promote_post_histories` (MATERIALIZED)3435592
    Params
    • id: 2
    • select_type: MATERIALIZED
    • table: tch_promote_post_histories
    • type: ALL
    • possible_keys: post_id,type,deleted_at
    • key: 
    • key_len: 
    • ref: 
    • rows: 343559
    • Extra: Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 33, 34, 37)350μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: ALL
    • possible_keys: PRIMARY
    • key: 
    • key_len: 
    • ref: 
    • rows: 7
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1, 2)310μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (9, 11, 14, 21, 27)220μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180223418, 180223419, 180223420, 180223421, 180223423, 180223424, 180223425, 180223429, 180223432, 180223433)310μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)101
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 10
    • Extra: Using index condition
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1220μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1220μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1220μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_articles` where `published` = 1 and `tch_articles`.`deleted_at` is null order by `created_at` desc limit 5490μstch123_dev_2020ArticleHelper.php#173
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/ArticleHelper.php:173
    • 16. app/Helpers/Khelper.php:2973
    • 17. view::_desktop.main.page.page_part.page_part_lastest_articles:22
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_articles` (SIMPLE)6641
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_articles
    • type: ref
    • possible_keys: published_deleted_at,deleted_at
    • key: deleted_at
    • key_len: 5
    • ref: const
    • rows: 664
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = '5_1' limit 1320μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:3
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc1.1mstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:4
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)290μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1390μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:6
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc720μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:7
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)280μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_3' limit 1340μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_3
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:9
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 3 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc460μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 3
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:10
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)2221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 222
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)240μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (56, 58, 60, 61, 62)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)240μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_promotions` where `published` = 1 and date(`date_begin`) <= '2025-04-11' and date(`date_end`) >= '2025-04-11' order by `priority` desc limit 1330μstch123_dev_2020header_user_not_login.blade.php#3
    Bindings
    • 0: 1
    • 1: 2025-04-11
    • 2: 2025-04-11
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.includes.header_user_not_login:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_promotions` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_promotions
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1300μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:3
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (2) order by `ordering` asc, `id_province` asc, `name` asc300μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:3
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 2 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc340μstch123_dev_2020Province.php#28
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:3
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1290μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:17
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` = 14 limit 1230μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:18
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 191 limit 1230μstch123_dev_2020LocationHelper.php#284
    Bindings
    • 0: 191
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:284
    • 21. app/Helpers/Khelper.php:199
    • 22. app/Http/Resources/ProjectResource.php:19
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_streets` where `tch_streets`.`id` = 1960 limit 1300μstch123_dev_2020LocationHelper.php#303
    Bindings
    • 0: 1960
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:303
    • 21. app/Helpers/Khelper.php:203
    • 22. app/Http/Resources/ProjectResource.php:20
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_streets` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_streets
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'address' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: address
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. view::_desktop.main.includes.footer:50
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
App\Models\District
187District.php#?
App\Models\Page
99Page.php#?
App\Models\Province
84Province.php#?
App\Models\PostCanHoDetail
30PostCanHoDetail.php#?
App\Models\Project
24Project.php#?
App\Models\PostCanHoExpand
20PostCanHoExpand.php#?
App\Models\Estate
16Estate.php#?
App\Models\User
15User.php#?
App\Models\Ward
12Ward.php#?
App\Models\Package
5Package.php#?
App\Models\Article
5Article.php#?
App\Models\Street
1Street.php#?
ClearShow all
Date ↕MethodURLData
#12025-04-11 06:42:38GET/cho-thue-can-ho-chung-cu-empire-city-thu-thiem.html?pn=1170498