Bắc Từ Liêm, Hà Nội
Sunshine City Ciputra
Chọn giá
Diện tích
Số phòng ngủ
Số toilet
Hướng chính
Đặt lại

Cho Thuê Căn Hộ Chung Cư Sunshine City Ciputra Mới Nhất T4/2025

Hiện có 103 căn hộ cho thuê

CHO THUÊ CĂN HỘ CHUNG CƯ SUNSHINE CITY CIPUTRA T4/2025

Với tổng số 102 tin đăng cho thuê căn hộ chung cư Sunshine City Ciputra tại Thuê căn hộ 123 đã phần nào chứng minh được sức hút của dự án này. Một dự án được đánh giá cao về vị trí mặc dù không phải là trung tâm thủ đô. Vậy cùng mình tìm hiểu giá thuê chung cư Sunshine City đồng thời lắng nghe những cảm nhận chân thật từ các cư dân đang thuê dự án này nhé.

Cho thuê căn hộ chung cư Sunshine City Ciputra
Cho thuê căn hộ chung cư Sunshine City Ciputra

Giá thuê căn hộ tại chung cư Sunshine City Ciputra mới nhất

Giá thuê chung cư Sunshine City Ciputra T4/2025
Loại căn hộ Giá thuê Phí quản lý
Không nội thất/ Đồ cơ bản Nội thất đầy đủ
2PN (77 - 82m2) 12 - 15 triệu/tháng 16 - 20 triệu/tháng 13.200 đồng/m2 (bao gồm VAT)
3PN (81 - 105m2) 14 - 16 triệu/tháng 18 - 25 triệu/tháng
Duplex 27 - 33 triệu/tháng 40 - 60 triệu/tháng

Cá nhân mình cảm nhận, nếu chưa tìm hiểu kỹ dự án, có lẽ đối với một chung cư nằm khu vực giáp sông Hồng, khu vực căn hộ Bắc Từ Liêm cho thuê, thì mức giá trên có phần hơi cao. Nhưng khi nghiên cứu kỹ về chung cư Sunshine City Ciputra cho thuê rồi mới biết, tại sao các cư dân lại hài lòng khi sống ở đây đến vậy. Cùng lắng nghe cảm nhận thực tế của họ trong thời gian thuê căn hộ Sunshine City Ciputra nhé.

Cảm nhận thực tế của người đã thuê chung cư Sunshine City Ciputra

Chị Hạnh thuê căn hộ Sunshine City Ciputra 4 năm nay cho biết: “Hồi mới thuê ở đây, ai nấy đều cản tôi, vì xung quanh mọi thứ chưa xong, đường xá còn ngổn ngang. Cho đến nay mặc dù chưa ưng ý lắm, do view bị hạn chế do vướng công trình Vietinbank xây cả thập kỷ chưa xong, thì còn lại mọi thứ đều ổn, tôi chấp nhận sống xa để có một môi trường nhiều cây cối xung quanh như thế này.”

Một cán bộ về hưu (giấu tên) mới chuyển về sống được 1 năm: “Bạn bè bác trong đây nhiều lắm, ở rải rác các tòa, nếu ai không biết lại cứ tưởng đây là nơi cán bộ về hưu không đó chứ. Nhưng có cái lý thì mấy bác mới chuyển về thuê chung cư Sunshine City để sống chứ đúng không? Thứ nhất, bác thấy nó cách xa ồn ào náo nhiệt, cả một đời náo nhiệt đủ rồi, giờ về đây sống an tĩnh. Thứ hai, ở đây cảm giác hưng thịnh, vì ngắm ngay cầu Nhật Tân và sông Hồng, bác ở tòa S3. Cuối cùng, ở đây mới mẻ và hiện đại, đi từ ngoài vào đã thấy thích lớp kính phủ khắp các tòa nhà rồi, trên còn là nơi đậu trực thăng nữa cơ. Tuy nhiên lớp trẻ thì chắc không thích ở đây, con bác nó không về đây sống, nó ở trong trung tâm, vì chúng nói ở đây buồn quá, xa trung tâm chẳng có gì chơi, vì thấy đường chim bay còn gần chứ mà đi từ đây vào hồ Tây chắc cũng ba cây số hơn, vì phải vòng qua cầu Nhật Tân, với khu Ciputra muốn đi hết chắc cũng 3km chứ không ít.”

Anh Phan mới thuê Sunshine City Ciputra được vài tháng nhận xét: “Nghe bảo đây chỉ phù hợp với cán bộ về hưu, nhưng về đây sống được ít tháng rồi mới thấy, quả đúng là như vậy, tại đúng là hiu quạnh, yên tĩnh hơn mấy khu như Vin hay Ngoại Giao Đoàn, nhưng bù lại không khí trong lành mát mẻ, về nhà cái là thoải mái lắm, không gian xanh ngập tràn, nhiều lúc còn tưởng bản thân đang đi nghỉ dưỡng ở đâu đó. Gợi ý cho anh em nào hướng nội như anh thì nên chuyển về đây thuê, căn hộ đẹp, giá cũng ok, tiện ra sân bay, thêm vào đó là không khí quá tuyệt vời, tiện ích thì ở đây nếu nói không sai thì là hàng đầu trong khu vực giai đoạn 2019 - 2020 luôn đấy, nên các bạn về đây sống phải nói là yên tâm nha, Ciputra bên trong nó đầy đủ lắm.”

Qua khảo sát thực tế, mình cảm nhận được rằng khách hàng thuê căn hộ chung cư Sunshine City có điểm chung là thích sự yên tĩnh, tránh xa không gian ồn ào và không khí bí bách ở trung tâm thủ đô. Riêng về tiện ích mặc dù không được nhắc đến quá nhiều, nhưng có thể thấy, tiện ích cũng thuộc “không dạng vừa”, vì nếu bạn biết, thì không có quá nhiều căn hộ Hà Nội cho thuê hiện nay có sân bay vả lại, dự án nằm trong KĐT Ciputra, được quy hoạch đồng bộ về mặt tiện ích. Nếu bạn đã sẵn sàng thuê chung cư Hà Nội hay đúng hơn là thuê dự án Sunshine City Ciputra thì đừng quên Thuê căn hộ 123.

Hãy thuê chung cư căn hộ Sunshine City tại Thuê căn hộ 123

Đứng trước nhiều sự lựa chọn nơi thuê lẫn cho thuê căn hộ chung cư Sunshine City Ciputra hiện nay mọi người có quá nhiều lựa chọn, tuy nhiên, thuê ở đâu an toàn đăng tin cho thuê chung cư Sunshine City Ciputra ở đâu có khách nhanh chóng? Đó lại là vấn đề nan giải. Nhưng yên tâm, vì Thuê căn hộ 123 chính là 1 trong số những website cho thuê căn hộ hàng đầu Việt Nam, với sự góp mặt của hàng ngàn chủ nhà và môi giới, quý doanh nghiệp BĐS, hàng chục ngàn tin đăng cho thuê và hàng trăm ngàn căn hộ đã xuất hiện tại website này. Vì thế bạn đừng nên bỏ qua Thuê căn hộ 123 nếu như muốn đăng tin cho thuê hoặc tìm thuê căn hộ Sunshine City bạn nhé.

Chọn khu vực
  • Toàn quốc
  • Hồ Chí Minh
  • Hà Nội
  • Bình Dương
  • Đà Nẵng
  • Hải Phòng
  • Long An
  • Bà Rịa Vũng Tàu
  • An Giang
  • Bắc Giang
  • Bắc Kạn
  • Bạc Liêu
  • Bắc Ninh
  • Bến Tre
  • Bình Định
  • Bình Phước
  • Bình Thuận
  • Cà Mau
  • Cần Thơ
  • Cao Bằng
  • Đắk Lắk
  • Đắk Nông
  • Điện Biên
  • Đồng Nai
  • Đồng Tháp
  • Gia Lai
  • Hà Giang
  • Hà Nam
  • Hà Tĩnh
  • Hải Dương
  • Hậu Giang
  • Hòa Bình
  • Hưng Yên
  • Khánh Hòa
  • Kiên Giang
  • Kon Tum
  • Lai Châu
  • Lâm Đồng
  • Lạng Sơn
  • Lào Cai
  • Nam Định
  • Nghệ An
  • Ninh Bình
  • Ninh Thuận
  • Phú Thọ
  • Phú Yên
  • Quảng Bình
  • Quảng Nam
  • Quảng Ngãi
  • Quảng Ninh
  • Quảng Trị
  • Sóc Trăng
  • Sơn La
  • Tây Ninh
  • Thái Bình
  • Thái Nguyên
  • Thanh Hóa
  • Thừa Thiên Huế
  • Tiền Giang
  • Trà Vinh
  • Tuyên Quang
  • Vĩnh Long
  • Vĩnh Phúc
  • Yên Bái
Hà Nội
  • Tất cả
  • Ba Đình
  • Bắc Từ Liêm
  • Cầu Giấy
  • Hà Đông
  • Đống Đa
  • Hai Bà Trưng
  • Hoàn Kiếm
  • Hoàng Mai
  • Long Biên
  • Nam Từ Liêm
  • Tây Hồ
  • Thanh Xuân
  • Đông Anh
  • Gia Lâm
  • Ba Vì
  • Chương Mỹ
  • Đan Phượng
  • Hoài Đức
  • Mê Linh
  • Mỹ Đức
  • Phú Xuyên
  • Phúc Thọ
  • Quốc Oai
  • Sơn Tây
  • Thạch Thất
  • Thanh Oai
  • Thanh Trì
  • Thường Tín
  • Ứng Hòa
  • Sóc Sơn
Bắc Từ Liêm
  • Tất cả
  • Xã Minh Khai
  • Xã Tây Tựu
  • Phường Phú Diễn
  • Phường Xuân Tảo
  • Xã Liên Mạc
  • Phường Cầu Diễn
  • Phường Phúc Diễn
  • Phường Cổ Nhuế 1
  • Phường Cổ Nhuế 2
  • Xã Xuân Đỉnh
  • Xã Đông Ngạc
  • Phường Đức Thắng
  • Xã Thượng Cát
  • Xã Thụy Phương
Chọn khoảng giá
  • Tất cả
  • Dưới 5 triệu
  • 5 - 7 triệu
  • 7 - 10 triệu
  • 10 - 15 triệu
  • 15 - 20 triệu
  • 20 - 30 triệu
  • 30 - 50 triệu
  • 50 - 100 triệu
  • Trên 100 triệu
Chọn diện tích
  • Tất cả
  • Dưới 20m2
  • 20m2 - 30m2
  • 30m2 - 50m2
  • 50m2 - 70m2
  • 70m2 - 90m2
  • 90m2 - 120m2
  • 120m2 - 200m2
  • 200m2 - 500m2
  • Trên 500m2
Số phòng ngủ
  • Tất cả
  • 1 phòng ngủ
  • 2 phòng ngủ
  • 3 phòng ngủ
  • 4+ phòng ngủ
Số toilet
  • Tất cả
  • 1 toilet
  • 2 toilet
  • 3 toilet
  • 4+ toilet
Hướng chính
  • Tất cả
  • Đông
  • Tây
  • Nam
  • Bắc
  • Đông Nam
  • Đông Bắc
  • Tây Nam
  • Tây Bắc
Request history7MBMemory Usage
164 statements were executed, 119 of which were duplicates, 45 unique. Show only duplicated171ms
  • Connection Establishedtch123_dev_2020Khelper.php#2679
    Backtrace
    • 15. app/Helpers/Khelper.php:2679
    • 16. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 17. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 18. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • select * from `tch_redirects` where `status` = 1 and `url` = '/cho-thue-can-ho-chung-cu-sunshine-city-ciputra.html' limit 13.93mstch123_dev_2020Khelper.php#2679
    Bindings
    • 0: 1
    • 1: /cho-thue-can-ho-chung-cu-sunshine-city-ciputra.html
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/Khelper.php:2679
    • 17. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 18. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 19. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 20. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • - EXPLAIN # 1: `tch_redirects` (SIMPLE)18161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_redirects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1816
    • Extra: Using where
  • select * from `tch_pages` where `tch_pages`.`id` = 1 limit 1510μstch123_dev_2020PageHelper.php#58
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/PageHelper.php:58
    • 21. app/Helpers/Khelper.php:256
    • 22. middleware::page.hook:14
    • 23. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 24. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-sunshine-city-ciputra' limit 1770μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-sunshine-city-ciputra
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. middleware::page.hook:16
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 20. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)420μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)450μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2692) and `tch_projects`.`deleted_at` is null880μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)420μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-sunshine-city-ciputra' limit 1430μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-sunshine-city-ciputra
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. app/Http/Controllers/PageController.php:37
    • 19. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 20. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)390μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)370μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2692) and `tch_projects`.`deleted_at` is null440μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)380μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, `name`, `code`, `total_posts` from `tch_provinces` order by `ordering` asc, `slug` asc420μstch123_dev_2020LocationHelper.php#24
    Hints
    • 0: The SELECT statement has no WHERE clause and could examine many more rows than intended
    Backtrace
    • 15. app/Helpers/LocationHelper.php:24
    • 16. app/Helpers/Khelper.php:1972
    • 17. app/Services/Page/PageService.php:377
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)631
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 63
    • Extra: Using filesort
  • select * from `tch_global_option` where `name` = 'post_paging' limit 1500μstch123_dev_2020Setting.php#23
    Bindings
    • 0: post_paging
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Services/Page/PageService.php:362
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select count(*) as aggregate from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2692 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null2.76mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2692
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)1121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_status_out_of_service_ordering_deleted_at
    • key_len: 312
    • ref: const,const,const,const
    • rows: 112
    • Extra: Using where; Using index
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select `tch_posts`.* from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2692 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null order by `tch_posts`.`ordering` desc, `tch_posts`.`published_at` desc limit 20 offset 05.9mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2692
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)1031
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_deleted_at
    • key_len: 13
    • ref: const,const,const
    • rows: 103
    • Extra: Using index condition; Using where; Using filesort
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 37)500μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180192102, 180195308, 180197552, 180200769, 180201217, 180203892, 180204295, 180205445, 180207227, 180207228, 180207415, 180207416, 180208009, 180208014, 180208015, 180208017, 180214318, 180219927, 180223077, 180223428)1.35mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_post_apartment_expands` where `tch_post_apartment_expands`.`post_id` in (180192102, 180195308, 180197552, 180200769, 180201217, 180203892, 180204295, 180205445, 180207227, 180207228, 180207415, 180207416, 180208009, 180208014, 180208015, 180208017, 180214318, 180219927, 180223077, 180223428)2.14mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_expands` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_expands
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_projects` where `tch_projects`.`id` in (2692) and `tch_projects`.`deleted_at` is null430μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` > 0 and `project_id` > 0 and `tch_pages`.`project_id` in (2692)45.15mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 2692
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)490μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` = 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`province_id` in (2)570μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 0
    • 4: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (27)400μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`district_id` in (27)33.78mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_users` where `tch_users`.`id` in (1622, 2750, 9016, 9899, 11966, 14393, 17764, 18092) and `tch_users`.`deleted_at` is null980μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_users` (SIMPLE)81
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_users
    • type: range
    • possible_keys: PRIMARY,deleted_at
    • key: deleted_at
    • key_len: 9
    • ref: 
    • rows: 8
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1310μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/Khelper.php:195
    • 19. app/Services/Page/PageService.php:427
    • 20. app/Services/Page/PageService.php:32
    • 21. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (2) order by `ordering` asc, `id_province` asc, `name` asc360μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/Khelper.php:195
    • 24. app/Services/Page/PageService.php:427
    • 25. app/Services/Page/PageService.php:32
    • 26. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 2 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc380μstch123_dev_2020Province.php#28
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Services/Page/PageService.php:427
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id` = 27 limit 1710μstch123_dev_2020LocationHelper.php#322
    Bindings
    • 0: 27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:322
    • 21. app/Helpers/Khelper.php:207
    • 22. app/Services/Page/PageService.php:430
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, CONCAT(pre," ",name) as text, CONCAT(pre," ",name) as name from `tch_wards` where `tch_wards`.`id_district` = 27 and `tch_wards`.`id_district` is not null order by LENGTH(name) ASC, CAST(name AS UNSIGNED) , `name` asc690μstch123_dev_2020District.php#34
    Bindings
    • 0: 27
    Backtrace
    • 16. app/Models/District.php:34
    • 17. app/Services/Page/PageService.php:430
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)141
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: ref
    • possible_keys: id_district
    • key: id_district
    • key_len: 4
    • ref: const
    • rows: 14
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = 5 limit 1350μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:183
    • 18. app/Helpers/Khelper.php:2292
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (0)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_districts` where `tch_districts`.`id` in (0)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1360μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:189
    • 18. app/Helpers/Khelper.php:2306
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)240μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2_27' limit 1670μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2_27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:216
    • 18. app/Helpers/Khelper.php:2307
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1270μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2346
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_2_27_project_2692' limit 1540μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2_27_project_2692
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:303
    • 18. app/Helpers/Khelper.php:2350
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)320μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)290μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2692) and `tch_projects`.`deleted_at` is null280μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1300μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2355
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_2' limit 1390μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.khuvuc:4
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc710μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.khuvuc:5
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)300μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)270μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)290μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1230μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1230μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1210μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1380μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1280μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1280μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1290μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1230μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1220μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1270μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1240μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1230μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`parent_id` = 2692 and `tch_projects`.`parent_id` is not null and `tch_projects`.`deleted_at` is null5.83mstch123_dev_2020page_part_project_childs.blade.php#13
    Bindings
    • 0: 2692
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.page.page_part.page_part_project_childs:13
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)15401
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1540
    • Extra: Using where
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1410μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1360μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1320μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1320μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1330μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1340μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1350μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1370μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1350μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1360μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1380μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select project_id, COUNT(*) as total from `tch_posts` where `district_id` = 27 and `created_at` > '2025-02-04 00:00:00' and `project_id` > 0 and `tch_posts`.`deleted_at` is null group by `project_id` having COUNT(*) > 0 order by COUNT(*) DESC limit 20930μstch123_dev_2020ProjectHelper.php#255
    Bindings
    • 0: 27
    • 1: 2025-02-04 00:00:00
    • 2: 0
    • 3: 0
    Backtrace
    • 15. app/Helpers/ProjectHelper.php:255
    • 16. view::_desktop.main.page.page_part.page_part_project:8
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: range
    • possible_keys: project_id_published_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at,district_id_published_status_out_of_service_deleted_at,created_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 1
    • Extra: Using index condition; Using where; Using temporary; Using filesort
  • select * from `tch_pages` where `project_id` > '0' and `province_id` = 2 and `count` > 0 and `district_id` = 27 order by `count` desc, `created_at` desc limit 1510.35mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 2
    • 2: 0
    • 3: 27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:19
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)18271
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: count_deleted_at
    • key: count_deleted_at
    • key_len: 4
    • ref: 
    • rows: 1827
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)320μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)280μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)270μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (1019, 1022, 1024, 1026, 1030, 1031, 1037, 1042, 1044, 1045, 1066, 2514, 2692, 2697, 2989) and `tch_projects`.`deleted_at` is null1.08mstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)151
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 15
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)360μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `project_id` > '0' and `district_id` = 27 and 1 = 1 order by `created_at` desc limit 57.47mstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:20
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)230μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (27)230μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)210μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (2697, 2700, 2842, 2989, 3081) and `tch_projects`.`deleted_at` is null430μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)390μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `tch_posts`.* from `tch_posts` where not exists (select * from `tch_promote_post_histories` where `tch_posts`.`id` = `tch_promote_post_histories`.`post_id` and `type` = 'RECREATEPOST' and `tch_promote_post_histories`.`deleted_at` is null) and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`status` = 'approved' and `tch_posts`.`deleted_at` is null order by `tch_posts`.`created_at` desc limit 10440μstch123_dev_2020PostHelper.php#621
    Bindings
    • 0: RECREATEPOST
    • 1: 1
    • 2: 0
    • 3: approved
    Backtrace
    • 15. app/Helpers/PostHelper.php:621
    • 16. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (PRIMARY)201
    Params
    • id: 1
    • select_type: PRIMARY
    • table: tch_posts
    • type: index
    • possible_keys: out_of_service_deleted_at,status_published_out_of_service_ordering_deleted_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 20
    • Extra: Using where
  • - EXPLAIN # 2: `tch_promote_post_histories` (MATERIALIZED)3435592
    Params
    • id: 2
    • select_type: MATERIALIZED
    • table: tch_promote_post_histories
    • type: ALL
    • possible_keys: post_id,type,deleted_at
    • key: 
    • key_len: 
    • ref: 
    • rows: 343559
    • Extra: Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 33, 34, 37)270μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: ALL
    • possible_keys: PRIMARY
    • key: 
    • key_len: 
    • ref: 
    • rows: 7
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1, 2)250μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (9, 11, 14, 21, 27)210μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180223418, 180223419, 180223420, 180223421, 180223423, 180223424, 180223425, 180223429, 180223432, 180223433)280μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)101
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 10
    • Extra: Using index condition
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1390μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1360μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1230μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1280μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1200μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_articles` where `published` = 1 and `tch_articles`.`deleted_at` is null order by `created_at` desc limit 5380μstch123_dev_2020ArticleHelper.php#173
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/ArticleHelper.php:173
    • 16. app/Helpers/Khelper.php:2973
    • 17. view::_desktop.main.page.page_part.page_part_lastest_articles:22
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_articles` (SIMPLE)6641
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_articles
    • type: ref
    • possible_keys: published_deleted_at,deleted_at
    • key: deleted_at
    • key_len: 5
    • ref: const
    • rows: 664
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = '5_1' limit 1320μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:3
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)400μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc930μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:4
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)270μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)320μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1310μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:6
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)190μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc500μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:7
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)220μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)230μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_3' limit 1290μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_3
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:9
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)190μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 3 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc360μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 3
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:10
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)2221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 222
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)210μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (56, 58, 60, 61, 62)210μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_promotions` where `published` = 1 and date(`date_begin`) <= '2025-04-05' and date(`date_end`) >= '2025-04-05' order by `priority` desc limit 1270μstch123_dev_2020header_user_not_login.blade.php#3
    Bindings
    • 0: 1
    • 1: 2025-04-05
    • 2: 2025-04-05
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.includes.header_user_not_login:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_promotions` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_promotions
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1260μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:2
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (1) order by `ordering` asc, `id_province` asc, `name` asc250μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:2
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 1 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc320μstch123_dev_2020Province.php#28
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:2
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1270μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:17
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` = 27 limit 1210μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 27
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:18
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 374 limit 1280μstch123_dev_2020LocationHelper.php#284
    Bindings
    • 0: 374
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:284
    • 21. app/Helpers/Khelper.php:199
    • 22. app/Http/Resources/ProjectResource.php:19
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_streets` where `tch_streets`.`id` = 18599 limit 1380μstch123_dev_2020LocationHelper.php#303
    Bindings
    • 0: 18599
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:303
    • 21. app/Helpers/Khelper.php:203
    • 22. app/Http/Resources/ProjectResource.php:20
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_streets` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_streets
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'address' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: address
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. view::_desktop.main.includes.footer:50
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
App\Models\District
181District.php#?
App\Models\Page
93Page.php#?
App\Models\Province
84Province.php#?
App\Models\PostCanHoDetail
30PostCanHoDetail.php#?
App\Models\Project
24Project.php#?
App\Models\PostCanHoExpand
20PostCanHoExpand.php#?
App\Models\Estate
16Estate.php#?
App\Models\Ward
15Ward.php#?
App\Models\User
8User.php#?
App\Models\Package
6Package.php#?
App\Models\Article
5Article.php#?
App\Models\Street
1Street.php#?
ClearShow all
Date ↕MethodURLData
#12025-04-05 18:24:08GET/cho-thue-can-ho-chung-cu-sunshine-city-ciputra.html164483