Quận 2, Hồ Chí Minh
Dự án
Chọn giá
Diện tích
Số phòng ngủ
Số toilet
Hướng chính
Đặt lại

Cho Thuê Căn Hộ Chung Cư Thảo Điền Green Mới Nhất T4/2025

Hiện có 49 căn hộ cho thuê

CHO THUÊ CĂN HỘ CHUNG CƯ THẢO ĐIỀN GREEN

Quận 2 lại có thêm một siêu phẩm căn hộ dự án cao cấp mới mang tên Thảo Điền Green Towers. Suốt thời gian qua đây luôn là cái tên “làm mưa làm gió” bởi là dự án cuối cùng nằm ven sông khu Thảo Điền được cấp phép xây dựng. Dĩ nhiên không chỉ trong lĩnh vực mua bán mà đến những người quan tâm thuê và cho thuê cũng bị hấp dẫn. Vậy hôm nay hãy cùng chúng tôi điểm qua những điều đáng chú ý nhất trong vấn đề cho thuê căn hộ chung cư Thảo Điền Green bên dưới đây nhé.

Chung cư Thảo Điền Green
Chung cư Thảo Điền Green

Giá cho thuê căn hộ Thảo Điền Green Towers T4/2025

Nhận được nhiều sự quan tâm nhất của khách thuê lẫn cho thuê căn hộ Thảo Điền Green Towers vào thời điểm này có lẽ là bảng giá. Với một dự án căn hộ mới ra mắt, việc định hình khung giá được diễn ra hết sức khó khăn. Chính vì thế Thuecanho123.com chúng tôi hôm nay cũng xin cập nhật một bảng giá cho thuê chung cư Thảo Điền Green mới nhất để các khách hàng cùng tham khảo.

BẢNG GIÁ CHO THUÊ CĂN HỘ CHUNG CƯ THẢO ĐIỀN GREEN T4/2025
Loại căn hộ Diện tích Giá cho thuê
1 phòng ngủ 54 - 61m² 11 - 13 triệu/tháng
2 phòng ngủ 83 - 88m² 15 - 18 triệu/tháng
3 phòng ngủ 108 - 130m² 19 - 25 triệu/tháng

Tổng số chỉ 204 căn hộ cao cấp được tung ra thị trường, chính vì thế giá cho thuê của dự án này sẽ nằm ở mức cao. Mọi đối tượng đều có thể trở thành cư dân tại dự án trên, từ cá nhân cho đến gia đình đa thế hệ. Bởi chung cư này có hệ thống căn hộ đa loại hình từ 1 phòng ngủ đến 3 phòng ngủ, penthouse rộng đến vài trăm mét vuông. Giá thuê căn hộ Thảo Điền Green Thủ Đức hiện tại đang được cập nhật, xong dự kiến giá thuê ở đây có căn lên đến hàng trăm triệu đồng mỗi tháng.

Những điều cần biết trước khi thuê chung cư Thảo Điền Green

Bên cạnh bảng giá cho thuê căn hộ chung cư Thảo Điền Green Towers thì chắc hẳn người đi thuê hay đầu tư cho thuê còn phải nắm rõ nhiều điều hơn nữa. Dưới đây là 3 điều lưu ý quan trọng về căn hộ cao cấp nằm ven sông này của Thảo Điền.

Vị trí dự án Thảo Điền Green Towers

Sở dĩ qua từng đợt bán giá của dự án này lại giao động tăng thêm 10 - 50 triệu đồng/m2 là do đây chính là tòa căn hộ cuối cùng sót lại tại khu vực Thảo Điền nằm ven sông. Một vị trí quá đỗi đắc địa thì việc giá bán hay giá cho thuê cao cũng là lẽ đương nhiên. Thảo Điền Green Towers tọa lạc tại số 192 Nguyễn Văn Hưởng, phường Thảo Điền, quận 2, Thủ Đức, Thành phố Hồ Chí Minh. Nếu quận 7 có Phú Mỹ Hưng, thì quận 2 lại biết đến biệt danh “khu nhà giàu Thảo Điền”. Vị trí trung tâm này sớm đã được cho là thuận lợi và chiếm vị thế tốt tại địa bàn quận 2.

Vị trí chung cư Thảo Điền Green
Vị trí chung cư Thảo Điền Green

Thảo Điền Green nằm ngay khúc cong của đường Nguyễn Văn Hưởng, cũng chính là “mũi tàu” thừa hưởng tất cả lợi thế view sông Sài Gòn hiếm dự án nào có được. Đặc biệt, nếu người dân chọn thuê căn hộ Thảo Điền Green Thủ Đức sẽ đảm bảo được khả năng kết nối trong và ngoài trung tâm thành phố. Mặc dù ở các khung giờ cao điểm, việc kẹt xe cũng không thể tránh khỏi. Nhưng dù vậy thì việc dự án này kế cận tuyến Xa Lộ Hà Nội, tuyến metro số 1 Bến thành – Suối Tiên, đại lộ Mai Chí Thọ giúp kết nối vào trung tâm, cao tốc TP HCM – Long Thành – Dầu Giây, cầu Thủ Thiêm, hầm Thủ Thiêm… cũng được xem là điểm rất sáng giá. Thảo Điền Green luôn là dự án nhận được sự quan tâm cực kỳ lớn tại thị trường cho thuê căn hộ chung cư Quận 2.

Tiện ích căn hộ Thảo Điền Green khi khách thuê

Nếu bạn chọn thuê căn hộ Thảo Điền Green thì xin được chúc mừng, bởi chuỗi hơn 30 tiện ích hạng sang đẳng cấp, thường xuất hiện trong các dự án quốc tế phục vụ cho các chuyên gia nước ngoài đã được nhà đầu tư đưa vào dự án. Cái tên gắn liền với tiện ích, chẳng ai nghĩ rằng giữa một trung tâm nhộn nhịp như Thảo Điền lại có sự xuất hiện của một dự án “Green”, mảng xanh có mặt trong hầu hết không gian xây dựng của chung cư, tạo cho cư dân một cảm giác thoải mái và thư giãn mỗi khi trở về nhà.

Tiện ích căn hộ Thảo Điền Green
Tiện ích căn hộ Thảo Điền Green

Các tiện ích được đầu tư bài bản và nhận về không ít lời khen của giới chuyên gia. Điểm qua một số tiện ích đẳng cấp mà khách thuê có thể trải nghiệm như: hồ bơi view trực diện sông Sài Gòn, hệ thống bể sục thư giãn, nhà hàng, Lounge Bar nằm quanh khu vực hồ bơi, hệ thống phòng tập gym siêu cao cấp, công viên thư giãn, công viên giải trí của trẻ, hệ thống cửa hàng mua sắm dưới chân tòa nhà… Ngoài ra cư dân tại đây cũng được tận hưởng đa tiện ích ngoại khu nằm trong khu Thảo Điền hoặc khu vực lân cận An Phú - An Khánh, gồm hệ thống chuỗi tiện ích TTTM, bệnh viện, trường học, sân thể thao, giải trí …

Mặt bằng dự án căn hộ Thảo Điền Green

Được thiết kế một tòa căn hộ cao 25 tầng hướng ra phía mặt tiền sông Sài Gòn, điểm nhấn và cũng là ưu thế cạnh tranh của dự án này. Được triển khai trên lô đất rộng gần 5.000m2 cũng là lô đất duy nhất còn sót lại nằm mặt tiền sông, tòa tháp duy nhất trên cao 25 tầng mang đến khoảng 204 sản phẩm căn hộ cao cấp đến với gia đình hoặc cá nhân có nhu cầu tìm kiếm nhà ở hạng sang tại khu Thảo Điền.

Tìm nơi cho thuê căn hộ Thảo Điền Green Towers giá rẻ

Hẳn là tham khảo bài viết đến đây thì có lẽ bạn đã có một dự định riêng cho mình rằng sẽ thuê căn hộ Thảo Điền Green Towers ngay bới những gì mà dự án này mang lại quá tuyệt vời. Vậy thì nhanh tay truy cập website Thuecanho123.com ngay bây giờ để có cơ hội sở hữu được căn hộ giá rẻ tại chung cư này nhé. Với hàng loạt tin đăng cho thuê đến từ chủ nhà lẫn các môi giới, song việc của bạn cần làm đơn giản là lựa chọn căn phù hợp nhu cầu và tài chính của bản thân sau đó liên hệ với số điện thoại có trong mỗi tin đăng.

Tìm thuê căn hộ Thảo Điền Green tại Thuecanho123.com
Tìm thuê căn hộ Thảo Điền Green tại Thuecanho123.com

Riêng nếu bạn đang trống căn hộ Thảo Điền Green quận 2 cần cho thuê thì hãy đồng hành cùng một nơi cho thuê căn hộ chung cư Thuecanho123.com chúng tôi. Nền tảng website chuyên biệt về mảng cho thuê chung cư căn hộ uy tín hiện nay trên thị trường sẽ giúp bạn mau chóng tìm được khách thuê Thảo Điền Green một cách tiết kiệm nhất. Nếu bạn cần hỗ trợ, hãy liên hệ ngay với đội ngũ CSKH của chúng tôi để nhận về sự giúp đỡ nhé.

Chọn khu vực
  • Toàn quốc
  • Hồ Chí Minh
  • Hà Nội
  • Bình Dương
  • Đà Nẵng
  • Hải Phòng
  • Long An
  • Bà Rịa Vũng Tàu
  • An Giang
  • Bắc Giang
  • Bắc Kạn
  • Bạc Liêu
  • Bắc Ninh
  • Bến Tre
  • Bình Định
  • Bình Phước
  • Bình Thuận
  • Cà Mau
  • Cần Thơ
  • Cao Bằng
  • Đắk Lắk
  • Đắk Nông
  • Điện Biên
  • Đồng Nai
  • Đồng Tháp
  • Gia Lai
  • Hà Giang
  • Hà Nam
  • Hà Tĩnh
  • Hải Dương
  • Hậu Giang
  • Hòa Bình
  • Hưng Yên
  • Khánh Hòa
  • Kiên Giang
  • Kon Tum
  • Lai Châu
  • Lâm Đồng
  • Lạng Sơn
  • Lào Cai
  • Nam Định
  • Nghệ An
  • Ninh Bình
  • Ninh Thuận
  • Phú Thọ
  • Phú Yên
  • Quảng Bình
  • Quảng Nam
  • Quảng Ngãi
  • Quảng Ninh
  • Quảng Trị
  • Sóc Trăng
  • Sơn La
  • Tây Ninh
  • Thái Bình
  • Thái Nguyên
  • Thanh Hóa
  • Thừa Thiên Huế
  • Tiền Giang
  • Trà Vinh
  • Tuyên Quang
  • Vĩnh Long
  • Vĩnh Phúc
  • Yên Bái
Hồ Chí Minh
  • Tất cả
  • Quận 1
  • Quận 2
  • Quận 3
  • Quận 4
  • Quận 5
  • Quận 6
  • Quận 7
  • Quận 8
  • Quận 9
  • Quận 10
  • Quận 11
  • Quận 12
  • Bình Tân
  • Bình Thạnh
  • Gò Vấp
  • Phú Nhuận
  • Tân Bình
  • Tân Phú
  • Thủ Đức
  • Bình Chánh
  • Cần Giờ
  • Củ Chi
  • Hóc Môn
  • Nhà Bè
Quận 2
  • Tất cả
  • Phường An Phú
  • Phường Bình An
  • Phường An Khánh
  • Phường Cát Lái
  • Phường Bình Khánh
  • Phường Thủ Thiêm
  • Phường Thảo Điền
  • Phường An Lợi Đông
  • Phường Bình Trưng Tây
  • Phường Thạnh Mỹ Lợi
  • Phường Bình Trưng Đông
Chọn khoảng giá
  • Tất cả
  • Dưới 5 triệu
  • 5 - 7 triệu
  • 7 - 10 triệu
  • 10 - 15 triệu
  • 15 - 20 triệu
  • 20 - 30 triệu
  • 30 - 50 triệu
  • 50 - 100 triệu
  • Trên 100 triệu
Chọn diện tích
  • Tất cả
  • Dưới 20m2
  • 20m2 - 30m2
  • 30m2 - 50m2
  • 50m2 - 70m2
  • 70m2 - 90m2
  • 90m2 - 120m2
  • 120m2 - 200m2
  • 200m2 - 500m2
  • Trên 500m2
Số phòng ngủ
  • Tất cả
  • 1 phòng ngủ
  • 2 phòng ngủ
  • 3 phòng ngủ
  • 4+ phòng ngủ
Số toilet
  • Tất cả
  • 1 toilet
  • 2 toilet
  • 3 toilet
  • 4+ toilet
Hướng chính
  • Tất cả
  • Đông
  • Tây
  • Nam
  • Bắc
  • Đông Nam
  • Đông Bắc
  • Tây Nam
  • Tây Bắc
Request history7MBMemory Usage
170 statements were executed, 125 of which were duplicates, 45 unique. Show only duplicated105ms
  • Connection Establishedtch123_dev_2020Khelper.php#2679
    Backtrace
    • 15. app/Helpers/Khelper.php:2679
    • 16. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 17. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 18. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • select * from `tch_redirects` where `status` = 1 and `url` = '/cho-thue-can-ho-chung-cu-thao-dien-green.html' limit 13.61mstch123_dev_2020Khelper.php#2679
    Bindings
    • 0: 1
    • 1: /cho-thue-can-ho-chung-cu-thao-dien-green.html
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/Khelper.php:2679
    • 17. app/Http/Middleware/RedirectTrailingSlash.php:26
    • 18. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 19. vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php:75
    • 20. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
  • - EXPLAIN # 1: `tch_redirects` (SIMPLE)18161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_redirects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1816
    • Extra: Using where
  • select * from `tch_pages` where `tch_pages`.`id` = 1 limit 1530μstch123_dev_2020PageHelper.php#58
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/PageHelper.php:58
    • 21. app/Helpers/Khelper.php:256
    • 22. middleware::page.hook:14
    • 23. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 24. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-thao-dien-green' limit 1950μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-thao-dien-green
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. middleware::page.hook:16
    • 19. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 20. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)290μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)370μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2947) and `tch_projects`.`deleted_at` is null620μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)370μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. middleware::page.hook:16
    • 24. vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:183
    • 25. app/Http/Middleware/LastUserActivity.php:25
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `slug` = 'cho-thue-can-ho-chung-cu-thao-dien-green' limit 1410μstch123_dev_2020PageHelper.php#100
    Bindings
    • 0: cho-thue-can-ho-chung-cu-thao-dien-green
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:100
    • 17. app/Helpers/Khelper.php:279
    • 18. app/Http/Controllers/PageController.php:37
    • 19. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 20. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: slug_deleted_at
    • key: slug_deleted_at
    • key_len: 767
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)280μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)330μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2947) and `tch_projects`.`deleted_at` is null350μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020PageHelper.php#100
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:100
    • 22. app/Helpers/Khelper.php:279
    • 23. app/Http/Controllers/PageController.php:37
    • 24. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
    • 25. vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:43
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, `name`, `code`, `total_posts` from `tch_provinces` order by `ordering` asc, `slug` asc350μstch123_dev_2020LocationHelper.php#24
    Hints
    • 0: The SELECT statement has no WHERE clause and could examine many more rows than intended
    Backtrace
    • 15. app/Helpers/LocationHelper.php:24
    • 16. app/Helpers/Khelper.php:1972
    • 17. app/Services/Page/PageService.php:377
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)631
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 63
    • Extra: Using filesort
  • select * from `tch_global_option` where `name` = 'post_paging' limit 1350μstch123_dev_2020Setting.php#23
    Bindings
    • 0: post_paging
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Services/Page/PageService.php:362
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select count(*) as aggregate from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2947 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null930μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2947
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)511
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_status_out_of_service_ordering_deleted_at
    • key_len: 312
    • ref: const,const,const,const
    • rows: 51
    • Extra: Using where; Using index
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select `tch_posts`.* from `tch_posts` left join `tch_post_apartment_details` on `tch_posts`.`id` = `tch_post_apartment_details`.`post_id` where `project_id` = 2947 and `tch_posts`.`status` = 'approved' and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`deleted_at` is null order by `tch_posts`.`ordering` desc, `tch_posts`.`published_at` desc limit 20 offset 02.37mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 2947
    • 1: approved
    • 2: 1
    • 3: 0
    Backtrace
    • 16. app/Services/Page/PageService.php:365
    • 17. app/Services/Page/PageService.php:425
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)491
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: ref
    • possible_keys: out_of_service_deleted_at,project_id_published_deleted_at,status_published_out_of_service_ordering_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at
    • key: project_id_published_deleted_at
    • key_len: 13
    • ref: const,const,const
    • rows: 49
    • Extra: Using index condition; Using where; Using filesort
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: ref
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: tch123_dev_2020.tch_posts.id
    • rows: 1
    • Extra: Using where; Using index
  • select * from `tch_packages` where `tch_packages`.`id` in (31)500μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180197949, 180198323, 180198324, 180199009, 180199137, 180199219, 180199224, 180199404, 180199611, 180200296, 180201109, 180201144, 180201291, 180201310, 180204529, 180204678, 180204796, 180209076, 180211422, 180214113)1.25mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_post_apartment_expands` where `tch_post_apartment_expands`.`post_id` in (180197949, 180198323, 180198324, 180199009, 180199137, 180199219, 180199224, 180199404, 180199611, 180200296, 180201109, 180201144, 180201291, 180201310, 180204529, 180204678, 180204796, 180209076, 180211422, 180214113)1.85mstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_post_apartment_expands` (SIMPLE)201
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_expands
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 20
    • Extra: Using index condition
  • select * from `tch_projects` where `tch_projects`.`id` in (2947) and `tch_projects`.`deleted_at` is null500μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` > 0 and `project_id` > 0 and `tch_pages`.`project_id` in (2947)44.94mstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 2947
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)370μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `district_id` = 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`province_id` in (1)420μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 0
    • 4: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (14)320μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `tch_pages`.`district_id` in (14)410μstch123_dev_2020PageService.php#365
    Bindings
    • 0: 0
    • 1: 0
    • 2: 0
    • 3: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where
  • select * from `tch_users` where `tch_users`.`id` in (1439, 2277, 2280, 2284, 2727, 9774, 11501) and `tch_users`.`deleted_at` is null900μstch123_dev_2020PageService.php#365
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Services/Page/PageService.php:365
    • 22. app/Services/Page/PageService.php:425
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
    • 25. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_users` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_users
    • type: range
    • possible_keys: PRIMARY,deleted_at
    • key: deleted_at
    • key_len: 9
    • ref: 
    • rows: 7
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1310μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/Khelper.php:195
    • 19. app/Services/Page/PageService.php:427
    • 20. app/Services/Page/PageService.php:32
    • 21. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (1) order by `ordering` asc, `id_province` asc, `name` asc370μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/Khelper.php:195
    • 24. app/Services/Page/PageService.php:427
    • 25. app/Services/Page/PageService.php:32
    • 26. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 1 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc360μstch123_dev_2020Province.php#28
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Services/Page/PageService.php:427
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)241
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 24
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id` = 14 limit 1310μstch123_dev_2020LocationHelper.php#322
    Bindings
    • 0: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:322
    • 21. app/Helpers/Khelper.php:207
    • 22. app/Services/Page/PageService.php:430
    • 23. app/Services/Page/PageService.php:32
    • 24. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `id`, CONCAT(pre," ",name) as text, CONCAT(pre," ",name) as name from `tch_wards` where `tch_wards`.`id_district` = 14 and `tch_wards`.`id_district` is not null order by LENGTH(name) ASC, CAST(name AS UNSIGNED) , `name` asc900μstch123_dev_2020District.php#34
    Bindings
    • 0: 14
    Backtrace
    • 16. app/Models/District.php:34
    • 17. app/Services/Page/PageService.php:430
    • 18. app/Services/Page/PageService.php:32
    • 19. app/Http/Controllers/PageController.php:42
    • 20. vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)111
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: ref
    • possible_keys: id_district
    • key: id_district
    • key_len: 4
    • ref: const
    • rows: 11
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = 5 limit 1340μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:183
    • 18. app/Helpers/Khelper.php:2292
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (0)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_districts` where `tch_districts`.`id` in (0)260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null320μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)280μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:183
    • 23. app/Helpers/Khelper.php:2292
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1' limit 1340μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:189
    • 18. app/Helpers/Khelper.php:2306
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null290μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:189
    • 23. app/Helpers/Khelper.php:2306
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_1_14' limit 1250μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:216
    • 18. app/Helpers/Khelper.php:2307
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null210μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:216
    • 23. app/Helpers/Khelper.php:2307
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1320μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2346
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1_14_project_2947' limit 1820μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1_14_project_2947
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Models/Page.php:303
    • 18. app/Helpers/Khelper.php:2350
    • 19. app/Services/Page/PageService.php:448
    • 20. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)350μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_projects` where `tch_projects`.`id` in (2947) and `tch_projects`.`deleted_at` is null370μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_estates` where `tch_estates`.`id` in (5)290μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Models/Page.php:303
    • 23. app/Helpers/Khelper.php:2350
    • 24. app/Services/Page/PageService.php:448
    • 25. app/Services/Page/PageService.php:32
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1380μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. app/Helpers/Khelper.php:2355
    • 23. app/Services/Page/PageService.php:448
    • 24. app/Services/Page/PageService.php:32
    • 25. app/Http/Controllers/PageController.php:42
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_pages` where `indexed` = '5_1' limit 1260μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.khuvuc:4
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)190μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)180μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)190μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.khuvuc:4
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc810μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.khuvuc:5
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)240μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.khuvuc:5
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1200μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1190μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1190μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1190μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1190μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_wards` where `tch_wards`.`id` = 0 limit 1180μstch123_dev_2020Page.php#366
    Bindings
    • 0: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. app/Models/Page.php:366
    • 22. view::_desktop.main.includes.khuvuc:34
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`parent_id` = 2947 and `tch_projects`.`parent_id` is not null and `tch_projects`.`deleted_at` is null3.22mstch123_dev_2020page_part_project_childs.blade.php#13
    Bindings
    • 0: 2947
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.page.page_part.page_part_project_childs:13
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)15401
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 1540
    • Extra: Using where
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1190μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1200μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1180μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item:33
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select project_id, COUNT(*) as total from `tch_posts` where `district_id` = 14 and `created_at` > '2025-02-17 00:00:00' and `project_id` > 0 and `tch_posts`.`deleted_at` is null group by `project_id` having COUNT(*) > 0 order by COUNT(*) DESC limit 20210μstch123_dev_2020ProjectHelper.php#255
    Bindings
    • 0: 14
    • 1: 2025-02-17 00:00:00
    • 2: 0
    • 3: 0
    Backtrace
    • 15. app/Helpers/ProjectHelper.php:255
    • 16. view::_desktop.main.page.page_part.page_part_project:8
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_posts
    • type: range
    • possible_keys: project_id_published_deleted_at,project_id_published_status_out_of_service_ordering_deleted_at,district_id_published_status_out_of_service_deleted_at,created_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 1
    • Extra: Using index condition; Using where; Using temporary; Using filesort
  • select * from `tch_pages` where `project_id` > '0' and `province_id` = 1 and `count` > 0 and `district_id` = 14 order by `count` desc, `created_at` desc limit 15480μstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 1
    • 2: 0
    • 3: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:19
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)18271
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: count_deleted_at
    • key: count_deleted_at
    • key_len: 4
    • ref: 
    • rows: 1827
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)200μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)200μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)190μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (402, 404, 405, 420, 422, 426, 450, 462, 2434, 2450, 2493, 2530, 2537, 2649, 2881) and `tch_projects`.`deleted_at` is null350μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)151
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 15
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:19
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `project_id` > '0' and `district_id` = 14 and 1 = 1 order by `created_at` desc limit 5310μstch123_dev_2020PageHelper.php#208
    Bindings
    • 0: 0
    • 1: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/PageHelper.php:208
    • 16. app/Helpers/Khelper.php:866
    • 17. view::_desktop.main.page.page_part.page_part_project:20
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)128691
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12869
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)200μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (14)190μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` in (0)180μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (3083, 3129, 3131, 3133, 3165) and `tch_projects`.`deleted_at` is null330μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_projects` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_projects
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)250μstch123_dev_2020PageHelper.php#208
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PageHelper.php:208
    • 21. app/Helpers/Khelper.php:866
    • 22. view::_desktop.main.page.page_part.page_part_project:20
    • 24. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select `tch_posts`.* from `tch_posts` where not exists (select * from `tch_promote_post_histories` where `tch_posts`.`id` = `tch_promote_post_histories`.`post_id` and `type` = 'RECREATEPOST' and `tch_promote_post_histories`.`deleted_at` is null) and `tch_posts`.`published` = 1 and `tch_posts`.`out_of_service` = 0 and `tch_posts`.`status` = 'approved' and `tch_posts`.`deleted_at` is null order by `tch_posts`.`created_at` desc limit 10520μstch123_dev_2020PostHelper.php#621
    Bindings
    • 0: RECREATEPOST
    • 1: 1
    • 2: 0
    • 3: approved
    Backtrace
    • 15. app/Helpers/PostHelper.php:621
    • 16. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_posts` (PRIMARY)201
    Params
    • id: 1
    • select_type: PRIMARY
    • table: tch_posts
    • type: index
    • possible_keys: out_of_service_deleted_at,status_published_out_of_service_ordering_deleted_at
    • key: created_at
    • key_len: 5
    • ref: 
    • rows: 20
    • Extra: Using where
  • - EXPLAIN # 2: `tch_promote_post_histories` (MATERIALIZED)3435602
    Params
    • id: 2
    • select_type: MATERIALIZED
    • table: tch_promote_post_histories
    • type: ALL
    • possible_keys: post_id,type,deleted_at
    • key: 
    • key_len: 
    • ref: 
    • rows: 343560
    • Extra: Using where
  • select * from `tch_packages` where `tch_packages`.`id` in (31, 33, 34, 37)310μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_packages` (SIMPLE)71
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_packages
    • type: ALL
    • possible_keys: PRIMARY
    • key: 
    • key_len: 
    • ref: 
    • rows: 7
    • Extra: Using where
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1, 2)350μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)21
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 2
    • Extra: Using where
  • select * from `tch_districts` where `tch_districts`.`id` in (9, 11, 14, 21, 27)330μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_post_apartment_details` where `tch_post_apartment_details`.`post_id` in (180223418, 180223419, 180223420, 180223421, 180223423, 180223424, 180223425, 180223429, 180223432, 180223433)360μstch123_dev_2020PostHelper.php#621
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Helpers/PostHelper.php:621
    • 21. view::_desktop.main.page.page_part.page_part_lastest_posts:3
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_post_apartment_details` (SIMPLE)101
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_post_apartment_details
    • type: range
    • possible_keys: post_id
    • key: post_id
    • key_len: 4
    • ref: 
    • rows: 10
    • Extra: Using index condition
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1300μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1310μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1250μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1240μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1270μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1290μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'using_google_cached_image' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: using_google_cached_image
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. app/Models/Post.php:197
    • 17. view::_desktop.main.post.post-item-aside:15
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_articles` where `published` = 1 and `tch_articles`.`deleted_at` is null order by `created_at` desc limit 5450μstch123_dev_2020ArticleHelper.php#173
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Helpers/ArticleHelper.php:173
    • 16. app/Helpers/Khelper.php:2973
    • 17. view::_desktop.main.page.page_part.page_part_lastest_articles:22
    • 19. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_articles` (SIMPLE)6641
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_articles
    • type: ref
    • possible_keys: published_deleted_at,deleted_at
    • key: deleted_at
    • key_len: 5
    • ref: const
    • rows: 664
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_pages` where `indexed` = '5_1' limit 1310μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:3
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)260μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null310μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:3
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 1 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc950μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 1
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:4
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)10991
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1099
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (1)290μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)330μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 22
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)300μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:4
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_2' limit 1330μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:6
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null270μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)230μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:6
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 2 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc530μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 2
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:7
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11791
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 1179
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (2)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (25, 27, 28, 31, 32, 33, 34, 35, 36, 37, 38, 39, 42, 48, 51, 52)250μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)161
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 16
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)240μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:7
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `indexed` = '5_3' limit 1300μstch123_dev_2020PageHelper.php#23
    Bindings
    • 0: 5_3
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 16. app/Helpers/PageHelper.php:23
    • 17. app/Helpers/Khelper.php:890
    • 18. view::_desktop.main.includes.main_menu:9
    • 20. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 21. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: ref
    • possible_keys: indexed_deleted_at
    • key: indexed_deleted_at
    • key_len: 768
    • ref: const
    • rows: 1
    • Extra: Using index condition
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (0)220μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_projects` where `tch_projects`.`id` in (0) and `tch_projects`.`deleted_at` is null250μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `` (SIMPLE)1
    Params
    • id: 1
    • select_type: SIMPLE
    • table: 
    • type: 
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 
    • Extra: Impossible WHERE noticed after reading const tables
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020PageHelper.php#23
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 21. app/Helpers/PageHelper.php:23
    • 22. app/Helpers/Khelper.php:890
    • 23. view::_desktop.main.includes.main_menu:9
    • 25. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 26. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_pages` where `estate_id` = 5 and `province_id` = 3 and `district_id` > 0 and `ward_id` = 0 and `street_id` = 0 and `project_id` = 0 and `published` = 1 and `count` > 0 order by `ordering` desc, `title` asc390μstch123_dev_2020Page.php#245
    Bindings
    • 0: 5
    • 1: 3
    • 2: 0
    • 3: 0
    • 4: 0
    • 5: 0
    • 6: 1
    • 7: 0
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 15. app/Models/Page.php:245
    • 16. view::_desktop.main.includes.main_menu:10
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_pages` (SIMPLE)2221
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_pages
    • type: range
    • possible_keys: estate_id_deleted_at,estate_id_province_id_deleted_at,estate_id_province_id_district_id_deleted_at,count_deleted_at,published_deleted_at,estate_id_project_id_deleted_at
    • key: estate_id_province_id_district_id_deleted_at
    • key_len: 15
    • ref: 
    • rows: 222
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` in (3)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` in (56, 58, 60, 61, 62)210μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)51
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: range
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: 
    • rows: 5
    • Extra: Using where
  • select * from `tch_estates` where `tch_estates`.`id` in (5)200μstch123_dev_2020Page.php#245
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 20. app/Models/Page.php:245
    • 21. view::_desktop.main.includes.main_menu:10
    • 23. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 24. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 25. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
  • - EXPLAIN # 1: `tch_estates` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_estates
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_promotions` where `published` = 1 and date(`date_begin`) <= '2025-04-18' and date(`date_end`) >= '2025-04-18' order by `priority` desc limit 1270μstch123_dev_2020header_user_not_login.blade.php#3
    Bindings
    • 0: 1
    • 1: 2025-04-18
    • 2: 2025-04-18
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. view::_desktop.main.includes.header_user_not_login:3
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
    • 20. vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:73
    • 21. vendor/laravel/framework/src/Illuminate/View/View.php:208
  • - EXPLAIN # 1: `tch_promotions` (SIMPLE)121
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_promotions
    • type: ALL
    • possible_keys: 
    • key: 
    • key_len: 
    • ref: 
    • rows: 12
    • Extra: Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 2 limit 1260μstch123_dev_2020LocationHelper.php#266
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 17. app/Helpers/LocationHelper.php:266
    • 18. app/Helpers/LocationHelper.php:185
    • 19. app/Helpers/Khelper.php:2797
    • 20. view::_desktop.main.includes.filter_box:3
    • 22. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id_province` in (2) order by `ordering` asc, `id_province` asc, `name` asc270μstch123_dev_2020LocationHelper.php#266
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 22. app/Helpers/LocationHelper.php:266
    • 23. app/Helpers/LocationHelper.php:185
    • 24. app/Helpers/Khelper.php:2797
    • 25. view::_desktop.main.includes.filter_box:3
    • 27. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using where; Using filesort
  • select * from `tch_districts` where `tch_districts`.`id_province` = 2 and `tch_districts`.`id_province` is not null order by `ordering` asc, `id_province` asc, `name` asc350μstch123_dev_2020Province.php#28
    Bindings
    • 0: 2
    Hints
    • 0: Use SELECT * only if you need all columns from table
    Backtrace
    • 16. app/Models/Province.php:28
    • 17. app/Helpers/LocationHelper.php:186
    • 18. app/Helpers/Khelper.php:2797
    • 19. view::_desktop.main.includes.filter_box:3
    • 21. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)301
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: ref
    • possible_keys: id_province
    • key: id_province
    • key_len: 4
    • ref: const
    • rows: 30
    • Extra: Using index condition; Using where; Using filesort
  • select * from `tch_provinces` where `tch_provinces`.`id` = 1 limit 1260μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 1
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:17
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_provinces` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_provinces
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_districts` where `tch_districts`.`id` = 14 limit 1220μstch123_dev_2020DelegatesToResource.php#139
    Bindings
    • 0: 14
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 21. vendor/laravel/framework/src/Illuminate/Http/Resources/DelegatesToResource.php:139
    • 22. app/Http/Resources/ProjectResource.php:18
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
    • 32. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
  • - EXPLAIN # 1: `tch_districts` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_districts
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_wards` where `tch_wards`.`id` = 190 limit 1280μstch123_dev_2020LocationHelper.php#284
    Bindings
    • 0: 190
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:284
    • 21. app/Helpers/Khelper.php:199
    • 22. app/Http/Resources/ProjectResource.php:19
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_wards` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_wards
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_streets` where `tch_streets`.`id` = 1990 limit 1260μstch123_dev_2020LocationHelper.php#303
    Bindings
    • 0: 1990
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 20. app/Helpers/LocationHelper.php:303
    • 21. app/Helpers/Khelper.php:203
    • 22. app/Http/Resources/ProjectResource.php:20
    • 23. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:108
    • 24. vendor/laravel/framework/src/Illuminate/Http/Resources/Json/JsonResource.php:255
  • - EXPLAIN # 1: `tch_streets` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_streets
    • type: const
    • possible_keys: PRIMARY
    • key: PRIMARY
    • key_len: 4
    • ref: const
    • rows: 1
    • Extra: 
  • select * from `tch_global_option` where `name` = 'address' limit 1260μstch123_dev_2020Setting.php#23
    Bindings
    • 0: address
    Hints
    • 0: Use SELECT * only if you need all columns from table
    • 1: LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
    Backtrace
    • 14. app/Helpers/Setting.php:23
    • 15. app/Helpers/Khelper.php:363
    • 16. view::_desktop.main.includes.footer:50
    • 18. vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:124
    • 19. vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
  • - EXPLAIN # 1: `tch_global_option` (SIMPLE)11
    Params
    • id: 1
    • select_type: SIMPLE
    • table: tch_global_option
    • type: const
    • possible_keys: name
    • key: name
    • key_len: 302
    • ref: const
    • rows: 1
    • Extra: 
App\Models\District
187District.php#?
App\Models\Page
99Page.php#?
App\Models\Province
84Province.php#?
App\Models\PostCanHoDetail
30PostCanHoDetail.php#?
App\Models\Project
24Project.php#?
App\Models\PostCanHoExpand
20PostCanHoExpand.php#?
App\Models\Estate
16Estate.php#?
App\Models\Ward
12Ward.php#?
App\Models\User
7User.php#?
App\Models\Package
5Package.php#?
App\Models\Article
5Article.php#?
App\Models\Street
1Street.php#?
ClearShow all
Date ↕MethodURLData
#12025-04-18 01:32:38GET/cho-thue-can-ho-chung-cu-thao-dien-green.html170490